Technical Bulletin

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMYOL
17OCT13
4
Technical Data Sheet
Page 1 of 2  2007 PANDUIT Corp
TDS: GMV1OL
Preprinted Laminated Polyester Film
This specification is intended to outline the physical and chemical properties of PANDUIT’s pressure sensitive preprinted RoHS
compliant laminated polyester material and include the following part numbers and printable material identifiers:
Part Number Prefixes
PLD-*
PESS
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive 2002/95/EC). GMYOL consists of a
2.0 mil polyester based polyester film with a 2.0 clear polyester over-laminate or a 1.5 mil
clear polyester over-laminate.
Print Methods:
This material is preprinted.
Adhesive:
Acrylic based, pressure sensitive permanent adhesive.
Standard Colors:
White and Yellow
Thickness:
4.7 +/- 0.7 mils (total laminated construction) depending on the choice of the over-laminate
Service Temperature
Range:
-40°F to 275°F (-40°C to 135°C)
Minimum Application
Temperature:
35°F (2°C)
Storage Conditions:
Store at 70°F (21°C) and 50% Relative Humidity.
PROPERTIES:
PERFORMANCE:
Peel Adhesion to Stainless
Steel:
60 oz/in width minimum (PSTC-101, 15 min. dwell)
Shear Adhesion:
24+ hours (PSTC-107, Procedure A)
Tensile Strength:
Depending on the type of over-laminate
MD 53 +/- 5.3 lbs./inch width (PSTC-131)
TD 74 +/- 7.4 lbs./inch width (PSTC-131)
Or
MD 52 +/- 5.2 lbs/inch width (PSTC-131)
TD 53 +/- 5.3 lbs/inch width (PSTC-131)
Elongation:
MD 130% +/- 15% (PSTC-131)
TD 115% +/- 15% (PSTC-131)
Or
MD 170%+/- 15% (PSTC-131)
TD 100%+/- 15% (PSTC-131)