Technical Bulletin

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMYOL
17OCT13
4
Technical Data Sheet
Page 2 of 2  2007 PANDUIT Corp
TDS: GMV1OL
Elevated Temperature
Exposure:
After 8 hours at 150°F (65.5°C) there was no deterioration of the substrate
Tack:
370 g/cm
2
(ASTM D-2979-88)
UV Resistance: *3000 hours no change observed (ASTM G154)
*3000 hours equates to 5 years of assimilated outdoor UV exposure.
CHEMICAL/SOLVENT RESISTANCE:
Preprinted samples were applied to stainless steel panels and conditioned for 24 hours at room temperature before testing.
The samples were then immersed in the specified reagents for five immersions using the following cycle: a 10 minute
immersion time followed by a 30 minute recovery time. After the fifth immersion, the samples were rubbed 10 times with
a lint free cotton gauze.
Chemical Reagent
Visual Observation
Substrate / Adhesive
Pre-Printed
Printed Legend
Distilled Water
No effect
No effect
Mineral Spirits
No effect
No effect
Toluene
No effect
No effect
Isopropyl Alcohol
No effect
No effect
Methanol
No effect
No effect
Acetone
Delamination of film
Loss of print density
Methyl Ethyl Ketone
Delamination of film
Loss of print density
1,1,1 Trichloroethane
Delamination of film
Loss of print density
Freon TF
No effect
No effect
Super Agitene
No effect
No effect
Jet-A Fuel
No effect
No effect
Arco TruSlide 68
No effect
No effect
SAE 30 Motor Oil
No effect
No effect
APPROVALS:
UL Recognized: UL969
File Number: MH 14576 (For PLD* parts only)
LIMITED WARRANTY
All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship
at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the
date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered
or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed
constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and
liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers or seller and
manufacturer.
NEITHER PANDUIT OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER.
THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED.
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or
use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in
connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to
operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.