MTP Cleaning Tools Model PN433 Operating Instructions

ManualsBrandsPanduit ManualsNetwork CardPN433

OPERATING INSTRUCTIONS PN433

*MTP is a registered trademark of US Conec Ltd.

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 1 of 4

MTP* Cleaning Tools

Part Numbers: FMTPFCT, FMTPMFCT, FIBCCT, FMTPRR6

READ ALL INSTRUCTIONS COMPLETELY BEFORE PROCEEDING

FMTPFCT

MTP* Female Fiber Cleaning Tool

FMTPMFCT

MTP* Male Fiber Cleaning Tool

FIBCCT

UICKNET Cassette MTP* Cleaning Tool

FMTPRR6 (Contains 6 reels)

Cleaning Reel Refill for FMTPFCT and FMTPMFCT

TABLE OF CONTENTS Page(s)

Safety Precautions.................................................................................................. 2

Important Connector Cleaning Information ............................................................. 2

FMTPFCT Instructions - Cleaning Female MTP* Connectors ................................ 2

FMTPMFCT Instructions - Cleaning Male MTP* Connectors ................................. 3

FIBCCT Instructions - Cleaning Q

UICKNET Cassette MTP* Connectors ................. 3

FMTPRR6 Instructions - Replacing FMTPFCT and FMTPMFCT Cleaning Reel.... 4

Summary of content (4 pages)

PAGE 1
MTP* Cleaning Tools Part Numbers: FMTPFCT, FMTPMFCT, FIBCCT, FMTPRR6 OPERATING INSTRUCTIONS PN433 © Panduit Corp. 2006 READ ALL INSTRUCTIONS COMPLETELY BEFORE PROCEEDING FMTPFCT FMTPMFCT MTP* Female Fiber Cleaning Tool MTP* Male Fiber Cleaning Tool FIBCCT FMTPRR6 QUICKNET Cassette MTP* Cleaning Tool (Contains 6 reels) Cleaning Reel Refill for FMTPFCT and FMTPMFCT TABLE OF CONTENTS Page(s) Safety Precautions.......................................................................................
PAGE 2
INSTALLATION INSTRUCTIONS PN433 SAFETY PRECAUTIONS 1. LASER LIGHT PROTECTION WARNING: LASER LIGHT IS INVISIBLE. THE INVISIBLE LIGHT IS POWERFUL ENOUGH TO DAMAGE YOUR EYES. SERIOUS DAMAGE TO THE RETINA OF THE EYE IS POSSIBLE. NEVER LOOK INTO THE END OF A FIBER THAT MAY HAVE A LASER COUPLED INTO IT. SHOULD ACCIDENTAL EYE EXPOSURE TO LASER LIGHT BE SUSPECTED, ARRANGE FOR AN EYE EXAMINATION IMMEDIATELY. 2.
PAGE 3
INSTALLATION INSTRUCTIONS PN433 FMTPMFCT Instructions - Cleaning Male MTP* Connectors 1. Grip the FMTPMFCT, depressing the green lever of the cleaning tool. The metal shutter on top of the cleaning tool will open, exposing fresh cleaning material. Fresh material is exposed each time the green lever is depressed. 2. Position the male MTP* ferrule endface so that the fiber tips are in contact with the cleaning material.
PAGE 4
INSTALLATION INSTRUCTIONS PN433 FMTPRR6 - Replacing FMTPFCT and FMTPMFCT Cleaning Reel 1. The cleaning reel should only be replaced in a clean and dust free environment. A contaminated cleaning reel may cause damage to fibers. 2. Use a coin or screwdriver to loosen the screw located on the front of the FMTPFCT or FMTPMFCT Fiber Cleaning Tools. 3. Open and remove the cover using the finger grip on the side of the tool. 4. Remove the cleaning reel and winding reel by lifting them straight out of the tool.