User Manual

For Technical Support: www.panduit.com
INSTALLATION INSTRUCTIONS
฀©฀Panduit฀Corp.฀2022
PN616C
T
O•
P
Made in PVC
03
USA
FT4 SUR F AC E N ON ME T ALL IC RACEWAY 68YL
600V MAX
Measure the height from
the floor to the underside
of the table. Channel
should be between 3-1/2"
and 4" shorter than mea-
sured height. If necessary,
cut channel from bottom
edge to accommodate.
2
MEASURE
TA B L E
HEIGHT
1
NOTE: Desired hole in table should be offset from table leg center to accommodate proper mounting of table leg.
Mounting
Bracket
Top of
Channel
Top Hole of
Channel
3A
Bottom Hole
of Channel
[2 Places]
Bottom of
Channel
Mounting
Bracket
3B
Page 12 of 15