User Manual

For Technical Support: www.panduit.com
INSTALLATION INSTRUCTIONS
฀©฀Panduit฀Corp.฀2022
PN616C
Secure mounting brackets to top and bottom of channel using provided
hardware. Use the holes closest to the ends of the channel for assem-
bly. Do not fully tighten the mounting bracket at this time.
Pre-drill holes in infrastructure if necessary. Secure
bottom mounting bracket to floor with proper hard-
ware. (Concrete screws provided)
Ensure channel is level. Secure top mounting
bracket to un
derside of table using provided
hardware.
Transition Boot Latch
Ensure end cap(s) or
coupler(s) connect to
bottom transition
boots as shown
[4 places]
7
7A
6
#8-32 x 3/4" Wood
Screws [4 Places]
5
4
#10-32 Hex
Nuts
#10-32 x 1" Screws
Page 13 of 15