User Manual
For Technical Support: www.panduit.com
INSTALLATION INSTRUCTIONS
©PanduitCorp.2022
PN616C
Capture Ledge
Bottom Edge of
Channel
Transition
Boot
7
#8-32 x 3/4"
Wood
Screws
[4 Places]
8
#10-32 Hex
Nuts
[2 Places]
#10-32 x 3/8"
Hex Screws
[2 Places]
Cover
[2 Places]
9
Stepped Flange
[2 Places]
Transition Boot
Latch
[4 Places]
Top Transition Boot
[2 Places]
Mounting Bracket
10
Set bottom edge of channel on capture ledge of installed
transition boot. Connect second transition boot to the first.
Ensure channel is level.Secure mounting bracket to underside of table
using provided hardware. Fully tighten mounting bracket screws to
secure channel in place.
Route cables prior to installing covers. Covers are tamper-proof
and are not intended for easy removal.
If added stiffness
is desired, secure bottom of channel using pro-
vided hardware in the lowermost holes of the channel.
As
semble top transition boots to each other. Transition boot latches will
mount to the stepped flanges of the mounting bracket.
Page 9 of 15