Cut Sheet

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMV3
8SEP16
5
Page 1 of 2  2005 PANDUIT Corp
TDS: GMV3
Self-Laminating Translucent Vinyl Film
This specification is intended to outline the physical properties of PANDUIT’s pressure sensitive self-laminating translucent vinyl material
and include the following part numbers and printable material identifiers:
Part Number Prefixes
Printable Material Suffixes
PSCB-*-Y
PSWMH-*-Y
VADY
PSCC-*-Y
PDL*
VAFY
PSM-*-Y
PLD-VBGSLY
VARY
PSWM-*-Y
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive 2002/95/EC).
Material is a self-extinguishing top coated vinyl film with a pressure sensitive
adhesive. This material is used in a self-laminating format for wire/cable
marking.
Print Methods:
This material is preprinted and recommended for dot matrix and thermal transfer
printing.
Adhesive:
Acrylic based, pressure sensitive high tack adhesive.
Standard Colors:
Translucent film with colored print-on area
Thickness:
4.25 +/- 0.45 mils (substrate and adhesive)
Service Temperature Range:
-40°F to 150°F (-40°C to 66°C)
Minimum Application Temperature:
40°F (4.4°C)
Storage Conditions:
Store at 70°F (21°C) and 50% Relative Humidity.
PROPERTIES:
PERFORMANCE:
Peel Adhesion to Stainless Steel:
32 oz/in width (PSTC-101, 15 min. dwell)
45 oz/in width (PSTC-101, 24 hrs dwell)
Shear Adhesion:
24+ hours (PSTC-107, Procedure A)
Tensile Strength:
MD 12.2 +/- 1.5 lbs./inch width minimum (PSTC-131)
3200 PSI minimum (ASTM D882)
Elongation:
MD 150% minimum (PSTC-131)
150% minimum (ASTM D882)
UV Resistance:
*3000 hours no change observed (ASTM G154)
Elevated Temperature Exposure:
After 8 hours at 150°F (65.5°C) there was no deterioration of the substrate
Flammability:
Average burn time less than 10 seconds (ASTM D1000)
Dielectric Strength: 1,900 Volts/Mil (ASTM D-149-97, Method A)
*3000 hours equates to 5 years of assimilated outdoor UV exposure.