Installation instructions

ManualsBrandsPanduit Manualschassis componentsPZLRB2U

INSTALLATION INSTRUCTIONS CM533A

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

Included components:

Component Quantity

PZLRB Main Bracket 1

Rectangular Mounting

Bracket

“L” Shaped Mounting Bracket 2

3/8-16 Carriage bolt 6

3/8-16 Carriage nut 6

Part Number Packs of #12-24 screws

PZLRB2U 2

PZLRB4U 4

PZLRB6U 6

Table of Contents

PZLRB6U

PZLRB4U

PZLRB2U

Page 1 of 14

PANZONE Overhead Distribution Racks

Part Numbers: PZLRB2U, PZLRB4U, PZLRB6U

MOUNT ON LADDER RACK..............................................

MOUNT ON SIDE RAIL (bracket down)..........................

BELOW....................................................................

ABOVE....................................................................

MOUNT ON SIDE RAIL (bracket up)..............................

BELOW....................................................................

ABOVE....................................................................

MOUNT BELOW CENTER RUNG..................................

PERPENDICULAR...................................................

PARALLEL...............................................................

MOUNT ON CABLE TRAY.................................................

MOUNT ON SIDE WALL (bracket down).........................

BELOW.....................................................................

ABOVE.....................................................................

MOUNT ON SIDE WALL (bracket up).............................

BELOW....................................................................

ABOVE....................................................................

MOUNT BELOW CABLE TRAY......................................

PERPENDICULAR....................................................

PARALLEL................................................................

2-4

2-3

5-7

5-6

II.

III.

IV.

VII.

VIII.

MOUNT ON WYR-GRID....................................................

MOUNT ON SIDE WALL (bracket down)........................

BELOW.....................................................................

ABOVE......................................................................

MOUNT ON SIDE WALL (bracket up)............................

BELOW.....................................................................

ABOVE......................................................................

MOUNT BELOW WYR-GRID

PERPENDICULAR

PARALLEL

ALTERNATE SIDE MOUNTING OF PZLRB MAIN

BRACKET TO RECTANGULAR BRACKET

POSITIONING OF MOUNTING BRACKETS......................

MOUNT USING THREADED RODS...................................

RECOMMENDED SUPPORT SPACING............................

GROUNDING......................................................................

8-10

8-9

Summary of content (14 pages)

PAGE 1
PANZONE Overhead Distribution Racks Part Numbers: PZLRB2U, PZLRB4U, PZLRB6U INSTALLATION INSTRUCTIONS CM533A © Panduit Corp. 2011 Included components: PZLRB2U PZLRB4U PZLRB6U Component Quantity Part Number Packs of #12-24 screws PZLRB Main Bracket 1 PZLRB2U 2 Rectangular Mounting Bracket 2 PZLRB4U 4 “L” Shaped Mounting Bracket 2 PZLRB6U 6 3/8-16 Carriage bolt 6 3/8-16 Carriage nut 6 Table of Contents I. MOUNT ON LADDER RACK..............................................
PAGE 2
INSTALLATION INSTRUCTIONS CM533A I. Mount on Ladder Rack Position Mounting Brackets Assemble PZLRB2U/4U/6U BELOW ABOVE BELOW Align Mount Brackets ABOVE SIDE MOUNT (bracket up) SIDE MOUNT (bracket down) Ladder Rack FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.
PAGE 3
INSTALLATION INSTRUCTIONS CM533A I. Mount on Ladder Rack Mount PZLRB2U/4U/6U Special Instructions 1. Side MountBelow Bracket Down Side MountAbove Bracket Down 2. 1. Position mounting brackets as shown in section V using the number ‘1’ configuration. After mounting the assembly, adjust all brackets to proper positions and secure it to the ladder rack using carriage bolts/nuts. 2. 1. Side MountBelow Bracket Up Position mounting brackets as shown in section V using the number ‘1’ configuration.
PAGE 4
INSTALLATION INSTRUCTIONS CM533A Mount on Ladder Rack I. Position Mounting Brackets Assemble PZLRB2U/4U/6U PARALLEL Align Mount Brackets PERPENDICULAR BOTTOM MOUNT Ladder Rack Special Instructions Mount PZLRB2U/4U/6U 1. Bottom MountParallel 2. 1. Bottom MountPerpendicular 2. Position mounting brackets as shown in section V using the ‘2’ or ‘3’ configuration.
PAGE 5
INSTALLATION INSTRUCTIONS CM533A II. Mount on Cable Tray Position Mounting Brackets Assemble PZLRB2U/4U/6U BELOW ABOVE BELOW Align Mount Brackets ABOVE SIDE MOUNT (bracket up) SIDE MOUNT (bracket down) Cable Tray FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.
PAGE 6
INSTALLATION INSTRUCTIONS CM533A II. Mount on Cable Tray Mount PZLRB2U/4U/6U Special Instructions 1. 2. Side MountBelow Bracket Down 3. 1. 2. Side MountAbove Bracket Down 3. 1. Side MountBelow Bracket Up 2. 3. 1. Side MountAbove Bracket Up 2. 3. Position mounting brackets as shown in section V using the number ‘1’ configuration.
PAGE 7
INSTALLATION INSTRUCTIONS CM533A II. Mount on Cable Tray Position Mounting Brackets Assemble PZLRB2U/4U/6U PARALLEL Align Mount Brackets PERPENDICULAR BOTTOM MOUNT Cable Tray Mount PZLRB2U/4U/6U Special Instructions 1. Bottom MountParallel 2. 3. 1. 2. Bottom MountPerpendicular 3. Position mounting brackets as shown in section V using the number ‘1’ configuration.
PAGE 8
INSTALLATION INSTRUCTIONS CM533A III. Mount on WYR-GRID Assemble PZLRB2U/4U/6U BELOW ABOVE BELOW Position Mounting Brackets ABOVE SIDE MOUNT (bracket up) SIDE MOUNT (bracket down) WYR-GRID Align Mount Brackets FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.
PAGE 9
INSTALLATION INSTRUCTIONS CM533A III. Mount on WYR-GRID Special Instructions Mount PZLRB2U/4U/6U 1. Side MountBelow Bracket Down 2. 3. 1. Side MountAbove Bracket Down 2. 3. 1. Side MountBelow Bracket Up 2. 3. 1. Side MountAbove Bracket Up 2. 3. Position mounting brackets as shown in section V using the number ‘1’ configuration. Locate L-shaped bracket top through corner wires. Locate Lshaped bracket flange notch on the lower sidewall wire.
PAGE 10
INSTALLATION INSTRUCTIONS CM533A III. Mount on WYR-GRID Assemble PZLRB2U/4U/6U PARALLEL Position Mounting Brackets PERPENDICULAR BOTTOM MOUNT WYR-GRID Align Mount Brackets Special Instructions Mount PZLRB2U/4U/6U 1. Bottom MountParallel 2. 3. 1. 2. Bottom MountPerpendicular 3. Position mounting brackets as shown in section V using the number ‘1’ configuration.
PAGE 11
INSTALLATION INSTRUCTIONS CM533A IV. Alternate Side Mount of PZLRB Main Bracket to Rectangular Bracket Mount PZLRB2U/4U/6U Special Instructions PZLRB Below PZLRB Above WYR-GRID (shown) Ladder Rack Cable Tray 1. 2. Position Main Bracket at desired height (select RU spacing). Mount Main Bracket to Rectangular Brackets using (4) screws. 1. 2. Position Main Bracket at desired height (select RU spacing). Mount Main Bracket to Rectangular Brackets using (4) screws. 1.
PAGE 12
INSTALLATION INSTRUCTIONS CM533A V. Positioning of Mounting Brackets 1” Scale Markings 3 2 3 4 2 1 1 4 Recommended Mounting Bracket Positions To use the markings, place the outsides of both the rectangular brackets on the recommended markings. Fig. 1 shows how to use marking numbered ‘2’. Fig 2 shows another example in which the smaller brackets are placed using marking numbered ‘3’. Spacing ‘4’ is the minimum recommended spacing for all cases.
PAGE 13
INSTALLATION INSTRUCTIONS CM533A VI. Mount Using Threaded Rods The main bracket can accommodate threaded rods of 1/2”, 3/8” and 5/8” diameters. Place two threaded rods into the holes provided on top of the main bracket and secure it using 4 nuts (not provided). Note that the 3/8” rod has no specific hole for the threaded rod. It just slides in the slots and can be adjusted accordingly (Symmetrical installation is highly recommended in this case).
PAGE 14
INSTALLATION INSTRUCTIONS CM533A VII. Recommended Support Spacing The PZLRB is to be mounted centered between supports spaced at 30” apart. Threaded rod Threaded rod 30” WYR-GRID (shown) Ladder Rack Cable Tray Support bracket Support bracket PZLRB VIII. Grounding Refer to common bonding network jumper kit. Part Number: RGCBNJ660P22 For instuctions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 14 of 14 E-mail: cs@panduit.