Technical Bulletin

5
Quick-Build
™
Harness Board System
Items in BOLD are core components for the Quick-Build
™
System.
Quick-Build
™
Wire Elastic Retainers
Part Number Description
Std.
Pkg.
Qty.
QB-RER.5-X
Quick-Build
™
Peg with RER.5-S6-X pre-installed for use with Quick-Build
™
System. Suitable for
1/2" bundle.
10
QB-RER.75-X
Quick-Build
™
Peg with RER.75-S6-X pre-installed for use with Quick-Build
™
System. Suitable
for 3/4" bundle.
10
QB-RER1.25-X Quick-Build
™
Peg with RER1.25-S6-X pre-installed for use with Quick-Build
™
System. Suitable
for 1.25" bundle.
10
QB-RERBASE-X Quick-Build
™
Peg suitable for user to permanently install user-supplied RER.5-S6-X, RER.75-S6-X,
or RER1.25-S6-X. Products sold separately – see page 6.
10
• Requires the use of Quick-Build
™
Mounting Pegs to provide a modular solution
• Repositionable, allowing user to build different harness configurations as needed
• Multiple sizes available to provide a securing point for different size bundles
6
Quick-Build
™
Mounting Platform
Part Number Description
Std.
Pkg.
Qty.
QB-BASE175-Q Mounting platform that is inserted in Quick-Build
™
Mounting Pegs 1.75" x 1.75" (44.45mm x 44.45mm).
Allows traditional harness board accessories and user supplied test fixtures to create a complete
Quick-Build
™
Harness System. Compatible with: #4, #6, #8, and ¼" screws. Screw length will vary based
on test fixtures and accessories used. Consider multiple QB-BASE175-Q components for large test
fixtures. Black.
25
QB-BASE120-Q Mounting platform that is inserted in Quick-Build
™
Mounting Pegs 1.2" x 1.2" (30.48mm x 30.48mm).
Allows traditional harness board accessories and user supplied test fixtures to create a complete
Quick-Build
™
Harness System. Compatible with #8 screws. Screw length will vary based on test fixtures
and accessories used. Consider multiple QB-BASE120-Q components for large test fixtures. Black.
25
• Requires the use of the Quick-Build
™
Mounting Pegs to provide a modular solution
• Repositionable, allowing user to build different harness configurations as needed
• Provides the ability to rotate to allow breakouts and cable pathways to accommodate
various harness design requirement
• Use Quick-Build
™
Mounting Screws (sold separately, see below) to secure user supplied
test fixtures and traditional harness board accessories (pages 6-7) to the Quick-Build
™
Mounting Platform
Quick-Build
™
Screws
Part Number Description
Std.
Pkg.
Qty.
QB-S6-500-C #6 screw; 1/2" long 100
QB-S8-500-C #8 screw; 1/2" long 100
QB-S8-750-C #8 screw; 3/4" long 100
QB-S25-500-C 1/4" screw; 1/2" long 100
QB-S25-1000-L 1/4" screw; 1" long 50
• Used to secure traditional harness board accessories and test fixtures to Quick-Build
™
Mounting Platform
• Phillips/slot combination screw style
Quick-Build
™
Grid Tile Connector
Part Number Description
Std.
Pkg.
Qty.
QB-CONN Grid tile connector to ensure accurate alignment of Grid System. One package includes five
pieces. Black.
1
Pkg.
• Optional accessory for use with grid tiles to prevent the need for plywood backing
and ensure accurate alignment of grid system
• Recommended for adjacent tiles where corners of two or four tiles come together
7
8
9