Technical Bulletin

7
Items in BOLD are core components for the Quick-Build
™
System.
Quick-Build
™
Harness Board System
Corner Posts
Wire End Holder
Part Number Description
Compatible QB Components
(see page 5)
Std.
Pkg.
Qty.
CPH.75-S8-X Corner post to assist in tight corners of harness systems. 0.75"
maximum bundle diameter. Center of bundle is 1.35" from surface.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
CPL.75-S8-X Corner post to assist in tight corners of harness systems. 0.75"
maximum bundle diameter. Center of bundle is 0.56" from surface.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
Part Number Description
Compatible QB Components
(see page 5)
Std.
Pkg.
Qty.
WEH-E8-C Use to retain end of wire in secure position. Helps when making
terminations or dressing harness.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
100
• Designed to pre-form tight bundles at harness corners and breakouts
• Top arm rotates upward for easy removal of completed harness
• Secures wire ends while harness is being fabricated
• Use with #28 thru #16 AWG wires
Not
Shown
11
Fanning Strip System
Part Number Description
Compatible QB Components
(see page 5)
Std.
Pkg.
Qty.
FSH40-X Fanning strip holder to elevate FS156 fanning strip 0.62" above
surface. 6.00" long. Black.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
FSHH-X Fanning strip holder to elevate FS156 fanning strip 1.42" above
surface. 3.2" long. Black.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
FS156-C Fanning strip with 76 spaces for wires up to 18 AWG. 12.1" long
and 0.31" tall.
N/A 100
Spring Wire Breakout System
Part Number Description
Compatible QB Components
(see page 5)
Std.
Pkg.
Qty.
SHH1-S8-X Spring wire holder that elevates spring 1.3" above surface.
Compatible with PBSC1-X spring. Black.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
SHH3-S8-X Spring wire holder that elevates spring 1.3" above surface.
Compatible with PBSC3-X spring. Black.
QB-BASE120-Q or QB-BASE175-Q
and QB-S8-500-C
10
PBSC1-X Spring compatible with SHH1-S8-X spring wire holder. N/A 10
PBSC3-X Spring compatible with SHH3-S8-X spring wire holder. N/A 10
PBSC6-X Spring used independent of spring wire holder. Requires 6"
spacing for mounting. Can be secured directly to Quick-Build
™
Mounting Platform.
QB-BASE175-Q and QB-S25-500-L 10
PBSC12-X Spring used independent of spring wire holder. Requires 12"
spacing for mounting. Can be secured directly to Quick-Build
™
Mounting Platform.
QB-BASE175-Q and QB-S25-500-L 10
• Holds wires in a specific orientation
• No sharp edges to damage wire insulation
• Accepts wires up to 18 AWG
• Fanning strip can remain as part of completed harness
• Harness board spring and spring holder secures wire ends while harness is
being fabricated
• Wires simply pull out from spring when harness is removed
• Each SHH spring holder is supplied with one rigid wire piece to hold the spring laterally
and two #8 (M4), 2" (50.8mm) hex head wood screws; purchase spring separately.
Not
Shown
Not
Shown