Installation Manual

Cabinet Grounding Kit

Rev. 01

Page 1 of 2

INSTALLATION INSTRUCTIONS T-PMPI-268-PC

©Panduit Corp. 2005

For Technical Support: www.panduit.com/resources/install_maintain.asp

Part Numbers: RGESD2-1 and NCRGBC636PF

See Figure 1

ESD Port Assembly

Grounding Strip

(RGS134-10-1)

See Figure 4

Cabinet Equipment

Rail Grounding

Assembly

See Figure 2

Grounding

Busbar

Assembly

See Figure 3

Cabinet Equipment

Rail Bonding

Assembly

See Figure 1

ESD Port

Assembly

General Assembly Notes

1. Clean all mating surfaces prior to installation using the provided cleaning pad.

2. Apply a very thin layer of anti-oxidizing paste (provided) to all mating surfaces prior to installation.

3. All M6 Thread Forming Screws are to be fastened using a 7mm socket wrench and an installation

torque of 35 in-lbs.

4. All 1/4-20 Bolts are to be fastened using a 7/16" socket wrench and an installation torque of 7 ft-lbs.

PAGE 1
Cabinet Grounding Kit Part Numbers: RGESD2-1 and NCRGBC636PF INSTALLATION INSTRUCTIONS T-PMPI-268-PC © Panduit Corp. 2005 See Figure 1 ESD Port Assembly Grounding Strip (RGS134-10-1) See Figure 1 ESD Port Assembly See Figure 4 Cabinet Equipment Rail Grounding Assembly See Figure 3 Cabinet Equipment Rail Bonding Assembly See Figure 2 Grounding Busbar Assembly General Assembly Notes 1. Clean all mating surfaces prior to installation using the provided cleaning pad. 2.
PAGE 2
INSTALLATION INSTRUCTIONS T-PMPI-268-PC © Panduit Corp. 2005 Cabinet Equipment Rail Grounding Strip (RGS134-10-1) Cabinet Equipment Rail Grounding Strip (RGS134-10-1) Grounding Washer (RGW - 100-1) Electrostatic Discharge (ESD) Protection Sticker M6 Cage Nut (NCCNM6-C) ESD Port (RGESD2-1) Lock Washer (RGLW14-C) Grounding Busbar (RGRB19) 1/4 - 20 Nut (RGN1420-C) M6 Thread Forming Screw (RGTSM6-C) 1/4 - 20 Bolt (RGNTS1420-C) Figure 1. ESD Port Assembly Flat Washer (RGFW14 - C) Figure 2.