Instruction Manual

ManualsBrandsPANDUIT ManualsCable CleatPANDUIT RW318 Aluminum and Plastic 2- Hole Cable Cleat

Aluminum and Plastic 2- Hole

Cable Cleat

Cable Cleat for the Protection and Support

Of Cables in a Flat Arrangement

RW318

Rev. AB [12-2022]

INSTALLATION INSTRUCTIONS

CCAL2H and CCPL2H Family of Cable Cleats

TO REDUCE THE RISK OF INJURY, USER

MUST READ INSTALLATION INSTRUCTIONS

BEFORE ATTEMPTING TO INSTALL

NOTE: In the interest of higher quality and value, Panduit products are

continually being improved and updated. Consequently, pictures

may vary from the enclosed product.

NOTE: Updates to this Installation Instructions may be available. Check

www.panduit.com for the latest version of this manual.

Summary of content (5 pages)

PAGE 1
Aluminum and Plastic 2- Hole Cable Cleat RW318 Rev. AB [12-2022] Cable Cleat for the Protection and Support Of Cables in a Flat Arrangement INSTALLATION INSTRUCTIONS CCAL2H and CCPL2H Family of Cable Cleats © Panduit Corp. 2022 TO REDUCE THE RISK OF INJURY, USER MUST READ INSTALLATION INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL NOTE: In the interest of higher quality and value, Panduit products are continually being improved and updated. Consequently, pictures may vary from the enclosed product.
PAGE 2
© Panduit Corp. 2022 INSTALLATION INSTRUCTIONS CCAL2H/CCPL2H Family of Cable Cleats Email: techsupport@panduit.com RW318 Rev. AB [12-2022] Panduit Corp. USA Technical Support Tel: 800-777-3300 EU Website: www.panduit.com/emea www.panduit.com EU Email: emeatoolservicecenter @panduit.com Panduit Europe • EMEA Service Center Tel: +31 546 580 452 • Fax: +31 546 580 441 Preparing for Order Step Picture Description 1 Contact Panduit Sales for assistance with Cleat and hardware selection.
PAGE 3
© Panduit Corp. 2022 INSTALLATION INSTRUCTIONS CCAL2H/CCPL2H Family of Cable Cleats RW318 Rev. AB [12-2022] Cleat Assembly Step Picture Description 1 Position one of the two identical cleat components over the appropriate holes in the rung. 2 Place cable in the cup of the cleat.
PAGE 4
© Panduit Corp. 2022 INSTALLATION INSTRUCTIONS CCAL2H/CCPL2H Family of Cable Cleats RW318 Rev. AB [12-2022] 3 Assemble top of cleat over the cable, nesting the antirotation features in the two halves of the cleat. 3A OPTIONAL. 2 Hole cleats may be stacked on each other up to three levels total. Stacking will affect stud/bolt length. This step should only be performed if specified in engineering instructions or drawings for your application.
PAGE 5
© Panduit Corp. 2022 INSTALLATION INSTRUCTIONS CCAL2H/CCPL2H Family of Cable Cleats 4 Assemble M10 or 3/8” mounting hardware through bolt holes. Tighten bolts to 90in-lbs [10.2Nm]. Ensure the top remains level during tightening. The position of the nut and bolt may be flipped. Follow engineering instructions for your application. END DOC#: RW318 RW318 Rev. AB [12-2022] Installed product.