Technical Bulletin

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMV17
09MAY17
10
Technical Data Sheet
Page 1 of 2  2011 PANDUIT Corp
TDS: GMV17
Self-Laminating Translucent Vinyl Film
This specification is intended to outline the physical properties of PANDUIT’s pressure sensitive self-laminating translucent vinyl
material and include the following part numbers and printable material identifiers:
Part Number Prefixes
Printable Material Suffixes
TTSL
TTSL*VC3-*-Y
VA1Y
V*TY
V*C
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive
2002/95/EC). Material is a self-extinguishing, top
coated vinyl film with a pressure sensitive adhesive.
This material is used in a self-laminating format for
wire/cable marking.
Print Methods:
This material is recommended for thermal transfer printing.
Adhesive:
Acrylic based, pressure sensitive adhesive.
Standard Colors:
Translucent film with colored print-on area
Thickness:
4.25 +/- 0.45 mils (substrate and adhesive)
Service Temperature Range:
-40°F to 150°F (-40°C to 66°C)
Minimum Application Temperature:
40°F (4.4°C)
Storage Conditions:
Store at 70°F (21°C) and 50% Relative Humidity.
PROPERTIES:
PERFORMANCE:
Peel Adhesion to Stainless Steel:
32 oz/in width (PSTC-101, 15 min. dwell)
45 oz/in width (PSTC-101, 24 hrs dwell)
Shear Adhesion:
24+ hours (PSTC-107, Procedure A)
Tensile Strength:
MD 3200 psi minimum (ASTM D882)
12.2 lbs./inch width minimum (PSTC-131)
Elongation:
MD 150% minimum (ASTM D882)
150% minimum (PSCT-131)
Elevated Temperature Exposure:
After 8 hours at 150°F (65.5°C) there was no deterioration of the
Substrate.
Dielectric Strength: 1900 Volts/MIL (ASTM D-149-97, Method A)
Flammability: Average burn time less than 10 seconds (ASTM D1000).
UV Resistance: *3000 hours no change observed (ASTM G154)
*3000 hours equates to 5 years of assimilated outdoor UV exposure.