Installation Manual
INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
CM599L
© Panduit Corp. 2016
Page 22 of 27
Cable Management/PDU Bracket Adjustment (optional)
• Cable Management/PDU brackets are height-adjustable if PDU spacing other than the factory position is desired.
• Remove [4 -or- 6] M5 Torx Screws from bracket, as shown below
• Reposition bracket at desired height, ensuring that mounting flange of bracket rests on the outside of cabinet post.
• Secure bracket to cabinet post with [2] M5 Torx Screws per bracket
M5 Torx Screws
-Use T25 Torx driver
DETAIL VIEW
Cable Management Panel
NOTE:
Alternate Mounting Holes
Primary Mounting Hole
Alternate mounting holes are to be used
when installing 70”+ PDUs on Cable Man-
agement/PDU Bracket in 42 RU cabinets