manual

INSTRUCTIONS CM599D

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 19 of 22

Cabinet Seal Kit Installation (Switch-Configured S-Type Cabinets ONLY*)

• Install Horizontal Blanking Panel so that front face aligns with equipment rails

• Install [2] Bottom Seal Brackets (Left Bracket is noted by diamond cutout)

• Attach D-shaped Rubber Seal to Horizontal Blanking Panel

• Attach 25mm x 50mm Foam Seals to bottoms of Horizontal Blanking Panel and [2] Bottom Seal Brackets

* Example part number: S8512

Horizontal Blanking Panel

(align with equipment rails)

[2] M5 Torx Screws

(use T25 Torx bit)

D-Shaped Rubber Seal

25mm x 50mm Foam Seals

LEFT Bottom

Seal Bracket

[2] M5 Torx Screws

(use T25 Torx bit)

RIGHT Bottom

Seal Bracket

(note diamond

cutout)