Cut Sheet

www.panduit.com
specifications
T-45 non-metallic multi-channel, two-piece, hinged cover design
surface raceway shall be used to route, protect, and conceal
data, voice, video, fiber optic and power cabling. The raceway
shall be listed as suitable for use in applications up to 600 volts
between conductors by Underwriters Laboratories, Inc. per
standard 5A, and by Canadian Standards Association, Inc.
per 22.2 no. 62.1-03, when screw secured and installed per
instructions. A full complement of fittings with a 1" minimum
bend radius compliant with TIA/EIA-568-B, must be available
as well as device brackets and junction boxes to install a variety
of communication and electrical devices. Divider walls must be
available to form separate channels in the multi-channel
raceway. An offset box shall be available, with versions for
“snap-on” as well as “screw mount” faceplates, for mounting the
power receptacle or the data receptacles outside of the raceway
channel. T-45 raceway will be manufactured from impact
resistant material with flammability rating of V-0. T-45 raceway
must be tamper resistant yet also allow access for moves, adds
and changes. T-45 raceway finish shall be pure color and will
resist scratches and dents and will not peel or corrode.
Pan-Way
®
T-45 Surface Raceway System
SPECIFICATION SHEET
applications
Pan-Way
®
T-45 Non-Metallic Surface Raceway
is a multi-channel channel raceway which
provides solutions for routing low voltage,
fiber optic and/or power cabling along
perimeter walls. T-45 Surface Raceway
terminates using the T-45 Hinged Data
and Power Brackets, T-45 Offset Box and
Pan-Way
®
Surface Mount Outlet Boxes and
superior Pan-Way
®
Snap-On Faceplates.
Fittings for T-45 are available to transition
to Pan-Way
®
LD Series Raceways.
technical information
Material:
Rigid PVC
Flammability:
UL94V-0; FT4
Voltage rating:
UL-5A 600VAC; CSA C22.2 No. 62.1-03 600V
Approvals:
UL Listed 95425 (raceway); UL Listed E116129 (fittings)
NEC:
Article 388
Color:
IW (Off White), EI (Electrical Ivory), WH (White) available in 8 foot
lengths only without adhesive
CSI spec form:
LP-CSISPEC-T45-1
key features and benefits
Unique size
Provides greater capacity in a smaller footprint allowing greater
flexibility to match the raceway to the application.
1"bend radius
control fittings
Meets TIA/EIA standard and many warranty requirements
Designer profile
Maintains the same aesthetically pleasing profile of Panduit
®
T-70,
Twin-70 and TG-70 Raceway which allows all four systems to work
together or independently
Multi-directional hinge
Easy access from either side of the raceway provides more
convenience for moves, adds and changes; latch is tamper
resistant which provides maximum security for communication
cabling and maximum safety for power cabling
Multi-channel capable
Capable of routing both power and communication cabling in a
single raceway
Multi-termination
options
Ability to create many different configurations using in-line termi-
nation features, offset boxes or certain Pan-Way surface mount
boxes.
Pan-Way
®
T-45 Raceway
Raceway Base with adhesive
8 feet: T45BIW8-A
10 feet: T45BIW10-A
Raceway Base without adhesive
8 feet: T45BIW8
10 feet: T45BIW10
Raceway Cover
8 feet: T45CIW8
10 feet: T45CIW10
Divider walls
8 feet: T45DW8
10 feet: T45DW10
T-45 Raceway Fittings
Cover coupler
fitting: T45CCIW-X
Outside corner
fitting: T45OCIW
Inside corner
fitting: T45ICIW
Right angle
fitting: T45RAIW
End cap fitting: T45ECIW
Entrance end
fitting: T45EEIW
Bend radius
control fitting: T45TRI
Reducer fitting: T45RLDIW
Tee fitting: T45TIW
Insert for tee
fitting: T45TD
T-45 Raceway Accessories
Hinged data
bracket: T45HDBIW
Wire retainer: T45WR-X
Workstation
Outlet Center
™
Offset box: T45WCIW
Workstation
Outlet Center
™
Offset box: T45WC2IW
Electrical bracket
and box for
duplex outlets: T45HEBIW
Electrical bracket
and box for
rectangular
outlets: T45HEGBIW
All parts listed in Off White (IW) color. To order
other colors substitute Electrical Ivory (EI) or
White (WH).