Components

Panduit Non-Metallic Surface Raceway - Quick Reference Guide
• One-piece single channel latching design
• Pre-applied adhesive backed tape
• Two-piece single channel latching design
• Pre-applied adhesive backed tape with screw
mountable option
• One-piece single channel tamper resistant
design
• Bendable in low voltage applications to route
over obstructions
• One-piece dual channel latching design
• Pre-applied adhesive backed tape
• Two-piece single channel with snap-in divider
design
• For routing data and low voltage cabling only
(50V or less)
• Available lengths – 6' , 8' , 10'
• For routing cables up to 600V
• Available lengths – 8' , 10'
• Pre-applied adhesive backed tape
• For routing cables up to 600V
• Available lengths – 10'
• Routes power and data cables together
• Available lengths – 8' , 10'
• Multi-directional cover hinge allows cable
installation from either side
• Available with/without adhesive backed tape
• Available lengths – 8' , 10'
Pan-Way
®
LD Series
Pan-Way
®
LDPH Series
Pan-Way
®
LDS Series
Pan-Way
®
LD2P Series
Pan-Way
®
T-45 Series
LD3 Series
Example part: LD3IW6-A
Colors: IW, EI, IG, WH
Spec Sheet: SRSP21
Spec Sheet: SRSP30
Spec Sheet: SRSP25
Spec Sheet: SRSP29
Spec Sheet: SRSP24
Example part: LDPH3IW8-A
Colors: IW, EI, IG, WH
Example part: LDS3IW10-A
Colors: IW, EI, IG, WH
Example part: LD2P10IW8-A
Colors: IW, EI, IG, WH
Example part: T45BIW8-A
Colors: IW, EI, WH
LDPH3 Series
LDS3 Series
LD2P10 Series
T45 Series
LD5 Series
LDPH5 Series
LDS5 Series
LD10 Series
LDPH10 Series
IW=Off white, EI=Electric Ivory, IG=International Gray, WH=White.
EI IGIW
WH
Note: Colors shown may differ slightly from actual raceway colors.
0.77" x 0.46"
A=0.21 in
2
0.75" x 0.41"
A=0.17 in
2
0.77" x 0.41"
A=0.21 in
2
1.51" x 0.86"
A=0.43 in
2
(Left channel)
A=0.50 in
2
(Right channel)
2.38" x 1.25"
A=2.12 in
2
Left Right
1.01" x 0.58"
A=0.38 in
2
1.02" x 0.55"
A=0.33 in
2
1.01" x 0.55"
A=0.38 in
2
1.51" x 0.94"
A=1.00 in
2
1.52" x 0.86"
A=0.89 in
2