Specification Sheet

www.panduit.com
Material: Thermoplastic Elastomer (TPE)
Operating temperature: -40°F to 180°F (-40°C to 82°C)
Flammability: UL 94-V0
Recommemded usage: Indoor use only
Standards compliance: Halogen free and RoHS
Meets EN 61010-1 (VDE 0411-1) for abrasion and wipe resistance
Meets EN ISO 175 for oil and chemical resistance
Meets EN 60464-2:2001 for resistance to solvents
Meets IEC 60947-7-1/2 for resistance to aging
Meets IEC 60068-2-6 for vibration resistance
key features and benefits
applications
technical information
specifications
Terminal Block Markers are to be continuously
molded, flexible polymer material. The elastomeric
material shall readily accept continuous thermal
transfer print, using the Panduit TDP43ME printer.
Product shall be resistant to scratching, smearing,
and rubbing. Product shall be able to be installed
and removed without the use of hand tools.
Thermal transfer printable
Faster printing speeds
Use single printer for all control panel labels; terminal
block markers, heat shrink, self-laminating, raised panel,
arc flash labels, voltage markers, and safety labels
Print-on-demand using Panduit labeling software
Allows use of standard resin ribbon – no need for difficult,
messy, or expensive ink cartridges
Provided on a convenient
Faster marker installation; install many markers in a
continuous reel single step
Less marker waste – print only as many as you need
Easy loading in Panduit TDP43ME printer and roll stand
Durability Flexible markers have superior holding strength in
terminal blocks, eliminating markers that fall out
Chemical and abrasion resistant
Shock and vibration resistant
Markers have an easy pull-apart design, and can be easily
replaced for any panel changes
Panduit computer printable terminal block
markers are ideally suited for printing
markers for terminal block labeling
applications within industrial control panels.
Panduit terminal block makers are designed
from a unique material and with an innovative
design that allows them to be printed
on-demand with the TDP43ME, and with a
standard resin ribbon. The markers are
provided on a continuous reel to allow
printing of the precise quantity needed for a
job. The continuous design makes printing
and installing markers faster as well.
Terminal Block Markers
SPECIFICATION SHEET
Terminal Block Markers
5mm x 12mm: TB05X12EWT-AB1
6mm x 12mm: TB06X12EWT-AB1
8mm x 12mm: TB08X12EWT-AB1
5mm x 8mm: TB05X08EWT-AB2
6mm x 8mm: TB06X08EWT-AB2
Easy Mark
PLUS
Labeling Software
CD-ROM: EMPLUS-CD
Online
download: EMPLUS-DL
USB
flash drive: EMPLUS-2GO
Server based
version: EMPLUS-SERVER
CAD-Connect Labeling Software
CD-ROM: PROG-CCCD
Thermal Transfer
Desktop Printer
300 dpi: TDP43ME
External roll
stand(required): TDP43ME-RS
Recommended Ribbon
TDP43ME
black resin
1" wide: RMER1BL
Other Compatible Ribbons
TDP43ME
black resin
2" wide: RMER2BL
TDP43ME
black resin
4" wide: RMER4BL

Summary of content (2 pages)