WALL MOUNT PREMIER SE TURNTABLE SHELF PANGE~ A U D I 0 AN AMERICAN COMPANY
Included Parts NO. Tools Needed QTY DESCRIPTION @)]D) 2 - Electric Drill ~ 4 - Phillips Screwdriver t})1111111111mm1mm1► 8 - Stud Finder 8 - Pencil/Pen A M8x25 B M8 C 8#x50 D <1>13 E <1>14x43 F M5 ~ ~ 8 ~ ~ 1 H ~ 1 I C? 1 K . ~ L-- J - Tape Measure (Optional) 1 G J - Level ,-------Use caution to avoid electrical wires, pipes, or any other in-wall hazards that cannot be seen through drywall.
Step 3A Wall ~ / Mounting on wall studs (preferred): / / 1. Locate and lightly mark wall studs and voids with a stud finder (not included). 2. Level (not included) the backplate (I) in the desired position against the wall. 3. Using step #1 marks as a guide, mark stud locations using backplate (I) as the template. 4. Use drill bit (H) to drill holes through the drywall into the studs. 5. Place screw (C) through screw cap (D). 6.
Step4 1. Put shelf (K) on spikes, aligning the spikes with the caps on the underside of the shelf. 2. Level the shelf, left to right, and front to back, by adjusting the threaded spikes (B). PANGEA: A u D D AN AMERICAN COMPANY For more products from Pangea, visit WWW. PANGEAAU D10.
