User Manual

Network Camera User Manual
17
 How to upgrade the IP camera ?
①
Ask the supplier for the suitable firmware.
②
You can use the web browser,
search tool, or PC client to upgrade the camera.
③
Go to the Configuration >
System > update, click browse and select the firmware, then click Upgrade
button and wait for the operation to complete.
 How to fetch the RTSP video stream and http snapshot ?
①
Main Stream: rtsp://IP:554/h264?username=admin&password=123456
②
Sub Stream: rtsp://IP:554/h264cif?username=admin&password=123456
③
Low resolution snapshot: http://IP/cgi-bin/snapshot.cgi?stream=1
④
HD snapshot : http://IP/cgi-bin/snapshot.cgi?stream=0
 Why does the NVR not show image after adding your IP camera ?
①
Make sure you selected the right protocol and enter the correct username and
password when adding the cameras.
②
Make sure the NVR and IP camera are the same IP scheme.
(eg. NVR:192.168.1.x, and IP camera:192.168.1.y).
③
Try changing the camera encode mode to H.264 if the NVR can’t support
H.265. (Configuration -> Camera -> Video > Encode mode: H.264)