Instructions for Use

4
W
orking with Internet Explorer
5
General Configurations
5
General Configurations
5
General Configurations
6
Working with mobile device
7
Frequently Asked Questions
Note: Only the Motorized Auto Focus cameras can Zoom In and Zoom Out.
Keeping pressing on live video and dragging for Digital Zoom.
If there is a delay in video response when accessing remotely, please switch to
Sub Stream instead. To learn the function of each button, just put the mouse on, it
will show screen tips.
1) Power System frequency configuration(50Hz/60Hz)
Configuration > Camera > Image > Power Frequency
To avoid the video flicker, the camera should be set to right working frequency to
suit the country electric system.
2) Tomodify the camera Title name and Time & Date
Configuration > Camera > Image > OSD > Title Message
Configuration > System > Time setup
There are two time update modes available, Manual and NTP.
a. Select your Time Zone, and click PC Sync. Set up your DST (Daylight Savings
Time) if needed , click Save. (Time and date will reset to 2000-01-01 if camera
restarts)
b. If the camera is connected to the Internet, you can set up a NTP server for the
camera to sync the time and date automatically.
3) Toenable Motion Detection Alarm
Configuration > Event > Video Detection
When Motion is detected
，
there is a small alarm light pup up beside the Alarm
menu. You can also setup an email address or FTP storage server to receive the
motion snapshot. (Trigger recording will work only if memory card or NFS NAS
connected. )
4) Tofind the device Cloud ID and QR code for p2p remote access
Configuration > Network > P2P
Using the P2P ID and QR code, you can access the camera remotely anywhere
via smart phone with Internet access. Please register an account via mobile
phone after installing the Danale APP from APP Store or Google Play Market,
then log in and add your camera to start previewing.
Or you can go to the website http://www.danale.com/ to register if you need PC
remote access. You can download APP from the website to find out more.
Tips: if the Login Status shows Offline, please check your Internet connection
and IP camera TCP/IP Network configurations. Please make sure to use a valid
DNS server IP in the TCP/IP Network setting.
Visit the Apple App Store or the Google Play Store to download the Danale app for
iOS or Android devices.
After installation, tap the icon to launch the Danale app. For first time use, please
create a new account by following the steps below:
1. For new users, please tap
CREATE NEW ACCOUNT to
register an account.
2.Type in your mobile phone
number or email address, then
tap NEXT .
3. Check your SMS or Email
for the verification code, then
tap NEXT .
4. Tap to Add devices
5. Tap QR Code to add to get
into the scan camera QR code
page, or click NEXT to discover
the connected local LAN IP
camera.
6. Put the IP camera QR code
in the app effective scan area,
and then give a nickname for
the recognized camera.
7. Tap the camera list to start
live video.
Tips:
a. Tap to check your account profile and configure settings
b. Toshare your camera with your friends or another user, click “ ” icon and
type in or scan his/her Danale account.
Note: if you cannot connect the camera, pleasecheck your Internet connection and
verify the IP address, gateway, and DNS setting in the camera. The Cloud login
status should be online, which means the camera has registered tothe cloud server.
Youmay also want to connect your phone to WiFi for better performance.
1. Why can’t I open the default IP address 192.168.1.110 via web browser?
Check your computer’s IP address before accessing the camera. If the IP
address does not match the 192.168.1.x scheme.
Make sure the IP address of the camera matches the LAN IP scheme. For
example, if the LAN is 192.168.1.xxx, then set the IP camera to
192.168.1.110 and so on. Only IE and Firefox ESR windows computer are
supported by the camera.
2. How to reset the password?
The default Username: admin, Password: 123456. If you lost the password
or would to reset the camera’s setting, please install the search tool to
search the camera IP and click Reset factory button.
3. How to upgrade the IP camera?
1) Ask the supplier for the suitable firmware
2) you can use the web browser, search tool, or PC client to upgrade the camera
3) go to the Configuration > System > update, click browse and select the firmware, then
click Upgrade button and wait for the operation to complete.
4. How to fetch the RTSP video stream and http snapshot?
1) Main Stream: rtsp://IP:554/h264?username=admin&password=123456
2) Sub Stream: rtsp://IP:554/h264cif?username=admin&password=123456
3) low resolution snapshot: http://IP/cgi-bin/snapshot.cgi?stream=1
4) HD snapshot : http://IP/cgi-bin/snapshot.cgi?stream=0
5. Why does the NVR not show image after adding your IP camera?
1) Make sure you selected the right protocol and enter the correct username and password
when adding the cameras,
2) Make sure the NVR and IP camera are the same IP scheme.(eg. NVR:192.168.1.x, and
IP camera:192.168.1.y),
3) try changing the camera encode mode to H.264 if the NVR can’t support
H.265. (Configuration -> Camera -> Video > Encode mode: H.264)
6. How to make the NVR record in motion detection mode?
1) Enable the IP camera motion detection function via web browser or Search configure tool,
2) add the IP camera via ONVIF protocol,
3) change the NVR record mode to Motion Detection mode,
4) check the NVR screen MD icon and try playback. Please refer to your NVR manual for
NVR motion record option.
6 7 9 10 11
8
9
Install Web Plug-in when red line characters prompted. You may have to download
WEBConfig.exe and run it as administrator(Make sure your pc have been connected
the internet.) After installation, restart or refresh your web browser and access the IP
again. The live video will start automatically after login successfully.