User Manual

Printer control and adjust
Click the Control button on top right of the main screen while the printer
is idle to open the control and adjust window. You can manually control
the printer movement here.
l By Clicking the HOME button to reset the extruder to zero point.
l Click the X/Y/Z button can reset each axis to the zero point.
l By dragging the block on each control bar to move the extruder to the
specific place.
l The numbers on the right side shows the real-time coordinate of the
extruder.
*Before or after the printing processing the printer will be in the idle state.
Meanwhile the printer doesn’t know the coordinate of the extruder. So
please remember homing the position before you manually control the
printer.