User Manual

saves the redundant operations while using PC connection or user interfaces, and make the

print work more convenient and fast:

（1） Save the sliced file name as “autoprint.pcode” and copy the file into SD card.

（2） Insert the SD card to the machine, the printer will auto start the print work with twice

“beep”, if the file is validated.

（3） If you need to stop the print work, just remove the SD card, the printer will auto stop.

 Serial Console

You can also use the Serial Console of Pango to do the start/pause/resume operations

of print work, and to maintain the machine.

 User Interface Extension

You can also use the LCD touch screen extension to improve the user experiences and

convenience of the printer.