User Manual

48
VOICE DICTATION
By using the voice dictation function, you can input the text by speaking your words
instead of using the keypad.
1. Press the
Left Soft Key
C
[
Message
], select
New Message
and press the
Center Select Key [OK]
.
2. Select the desired message type to send and press the
Center Select Key [OK]
.
3. Enter the email address or phone number in the
To
field and press the
Center
Select Key [OK]
.
4. In the
Text
field, press and hold the
Voice Commands Key
O
, and speak into
the handset. Release the
Voice Commands Key
O
after one word.
5. When entered text is correct, press the
Center Select Key [OK]
to confirm. If
incorrect, amend the text by using the keypad. For details on how to use the
keypad, see page 60, “TEXT INPUT.
Voice dictation mode cannot be used when the Bluetooth® connection is in use.
The voice dictation function supports US English only.
Before using voice dictation, the phone should be trained by your voice.
TEXT TO SPEECH
READING OUT UNREAD MESSAGES WITH THE FLIP OPEN
With the flip open, the handset reads out the text information with a synthetic voice.
1.
With the flip open in idle mode, press and hold the Voice Commands Key O.
- The handset reads out unread received messages one after another for you
with a synthetic voice.
2. Press the
Left Soft Key
C
[
Again
] to go back to the top of the message
currently being read.
3. Press the
Center Select Key
[
REPLY
] to create a reply message for the currently
reading message.