User's Manual

51
• SMTP Authenticate: If set to On then the username and password are
used to authenticate your identity when you send e-mail messages
using the SMTP protocol.
E-mail Bearers:
The Internet data connection used to connect to the e-mail server.
GPRS
: Select this item then press the [Edit] Soft key to edit the
APN Name, User ID, and Password.
• CSD
: Select this item then press the [Edit] Soft key to edit the Dial
Number, User ID, Password, and Modem Type (ISDN or Analog).
Save Message: Specifies whether e-mail messages are saved in the Sent
Box after they are sent. Press the [
] or [ ] scroll key to select
either On or Off.
Saving Memory: Specifies where received e-mails are stored. Press the
[
] or [ ] scroll key to select between the following:
• Internal Memory: Saves the files, which are attached to E-mail, in
your phone. However, only certain file types can be saved.
• External Memory: Saves the files, which are attached to E-mail, in
your phone’s memory. In this case, all file types can be saved in the
Attachments folder.
• CB Msg.
Before you can receive Cell Broadcast (CB) messages, you must configure
the following settings.
• Language: Specifies the language of CB messages your phone will
receive.
• Info. Subjects: Specifies the subject of CB messages your phone will
receive:
Standard: Predefined subject list.
Custom: User-defined subject list.
• Receive: Press the [
] or [ ] scroll key to specify whether or
not you want to receive CB messages.
• Voice Mail
Before you can access the voice mailbox provided by your network service
provider,
• Call: Calls the predefined voice mail system to check whether you
have voice mail.
• Voice Mail Number: Specifies the voice mail recipient number
manually.
Memory Info.
This function displays the amount of used and available memory on your
phone.
Press the [Menu] Soft key then select 1.Messages then select 8.Memory
Info, then press the [
] key.