User's Manual

18
03
04
05
06
07
02
01
19
Correct Incorrect
Correct Incorrect
3. To remove the Wall Charger, gently pull the charger from
the device.
• When you charge the battery with the handset powered
o you will see a charging status screen. After the charging
has completed, the Charge Complete message appears. You
cannot operate the phone until it is powered on. To turn your
phone on, press and hold the END/POWER Key
until your display turns on.
• The battery is not fully charged at the time of purchase. Fully charge the battery
before use.
• It is more ecient to charge the battery with the handset powered o.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the battery.
USING A microSD
TM
CARD
A microSD
TM
card stores sounds, videos, images, photos, music, and other les.
INSTALLING A microSD
TM
CARD
To install your microSD
TM
card:
1. Remove the cover of micro SD Card Slot.
2. Press the microSD
TM
card into the slot with the gold
contacts facing up.
3. Replace the cover of micro SD Card Slot.
REMOVING A microSD
TM
CARD
To remove the microSD
TM
card:
1. Remove the cover of micro SD Card Slot.
2. Gently push the exposed edge of the microSD
TM
card
with your ngertip to release it from the slot.
3. Remove the microSD
TM
card.
4. Replace the cover of micro SD Card Slot.
BATTERY HANDLING INFORMATION
CAUTIONS: THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY IS USED.
DISPOSE OF USED BATTERY ACCORDING TO LOCAL LAWS.
DO’S
• Only use the battery and charger approved for use with the JEST
TM
2.
• Only use the battery for the system for which it is specied.
• Only use or replace the battery with a charging system or another battery that has been qualied with the
system per this standard, IEEE-Std-1725-2006. Use of an unqualied battery or charger may present a risk of
re, explosion, leakage, or other hazard.
• Only use the battery for its original purpose. As an improper battery use may result in a re, explosion or
other hazard.
• Try to keep batteries in a temperature between 36°F (0°C) and 95°F (35°C). If the battery is stored in
temperatures above or below the recommended range, give it time to warm up or cool down before using.