User's Manual

80
01
02
03
05
06
07
04
81
3. Select Tone , Vibrate or Reminder , then press the Key.
• Tone: Press the Directional Key up or down to select a ringer, then press the Key
[
SET ]. To play the alert tone, press the Left Soft Key [ Play ].
•
Vibrate: Press the Directional Key up or down to select On or O , then press the
Key [
SET ].
•
Reminder: Press the Directional Key up or down to select Once , Every 2 minutes , Every
15 minutes
or O , then press the Key [ SET ].
EMERGENCY TONE
1. Slide the phone up, press the Key [ MENU ], then press
9. Tools & Settings , 2. Sounds Settings , 2. Alert Sounds ,
4. Emergency Tone
.
2. Select
Alert , Vibrate or O , then press the Key [ SET ].
3. To view the help for Emergency Tone , press the Left Soft Key [ Help ].
KEYPAD SOUNDS
To select keypad sounds when using the QWERTY Keypad.
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 3. Keypad Sounds .
2. Select
DTMF , Cloud or Simple , then press the Key [ SET ].
DTMF is the default setting for this device.
KEYPAD VOLUME
To set the keypad volume:
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 4. Keypad Volume .
2. Adjust the volume by pressing the Directional Key
up or down, then press
the
Key [ SET ] to save the setting. To test the volume level, press the Left
Soft Key
[ Play ].
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out loud when you enter a
phone number with the QWERTY Keypad.
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 5. Digit Dial Readout .
2. Select
On or O , then press the Key [ SET ].
SERVICE ALERTS
To set any of the three Alert options to either On or O:
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 6. Service Alerts .
2. Select one of the following options, then press the Key.
• Minute Beep: Alerts you every minute during a call.
• Call Connect: Alerts you when the call is connected.
•
Software Update: Alerts you when a software update is available.
3. Select On or O , then press the Key [ SET ].
DEVICE CONNECT
Allows you to turn the Device Connect On or O:
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 7. Device Connect .
2. Select
On or O , then press the Key [ SET ].
POWER ON/OFF
To set the phone to sound a tone when the phone is powered on or o:
1. Slide the phone up, press the Key [ MENU ], then press 9. Tools & Settings ,
2. Sounds Settings , 8. Power On/O .
2. Press
1. Power On or 2. Power O .
3. Select On or O , then press the Key [ SET ].