User Manual

53
Profiles
This function selects or edits WAP connection profiles on your phone.
NOTE: The settings for your WAP service are already entered as required
by your service provider. Care should be taken when you make any
modification to a profile since it may cause WAP to be inoperative.
Your phone is compatible with OTA (Over The Air) messages. These are
used by service providers to send connection details directly to your phone.
Please ask your service provider for details of this service.
1. Press the [Menu] Soft key, select 4.MEdia Net, and then select
4.Profiles.
2. To select a profile, highlight it in the Profile List then press the [
]
key. You cannot select Unedited Profile.
To edit a profile, select it in the Profile List then press the [Edit] Soft
key to select from the following functions.
• Profile Name: Press the [
] key to change the profile name.
• Home URL: Press the [
] key to edit the Homepage URL
provided by your service provider.
• Connection Type: Select either WAP or HTTP.
• GSM Settings: This function allows you to set the GSM network
proxy by inputting the following information.
Gateway/Proxy
: If you set the Connection Type to WAP,
Gateway is displayed. If you set it to HTTP, Proxy is displayed.
Press the [
] key to display the subfunctions such as IP
Address and IP Port, then input the appropriate information for
each of the following subfunctions, inputting the information
provided by your service provider.
Data Call Type
: Press the Left or Right scroll key to select
ISDN or Analog.
Dial Number
: Press the [ ] key to input the appropriate
dialup number.
Login ID
: Press the [ ] key to input the appropriate login ID.
Password
: Press the [ ] key to input the appropriate
password.
• GPRS Settings: This menu allows you to set the GPRS network
proxy by inputting the following information.
Gateway/Proxy
: If you set the Connection Type to WAP,
Gateway is displayed. If you set it to HTTP, Proxy is displayed.
Press the [
] key to display the subfunctions such as IP
Address and IP Port, then input the appropriate information for
each of the following subfunctions, inputting the information
provided by your service provider.
Access Point
: Press the [ ]key to input the appropriate