User Manual

61
- Wallpaper – Adds a photo to ‘Wallpaper’ in ‘Display Settings’. The
photo is set as the background image of the main screen.
- Contact – Assigns a specific photo image to Contacts.
 Rename: Renames a file.
 Delete: Deletes all files.
 Information: Views the information on a file.
 Copy to Phone : Copies the files of external memory to the phone
NOTE: The Micro-SD Card (Trans-Flash Card)must be removed after the
Phone has been turned off. Otherwise, the card or Phone may be
damaged.
Troubleshooting when “Check External Memory” popup window appears.
In the situations described below, “ External Memory Mount Start ”
popup window appears when the card is pulled out and reinserted, and
then the “Check External Memory” message may continue to appear.
- File is suddenly not saved.
- File list does not show up properly.
- Video clips run slow.
- etc.
In such cases, you can take the following actions.
1. Connect the phone and PC with USB cable.
2. Select “ Menu->9.Settings->5.Connectivity->1.USB Mass
Storage->On”.
3. Select from the following three options.
- When using Windows
 Windows 2000
1. The new portable disk folder shows in Windows
Explorer. Right-click the mouse on the folder.
2. Select Properties->Tools->Check Now…
3. Check both “Automatically fix file system errors” and
“Scan for and attempt recovery of bad sectors,” and
click Start.
4. Select "Yes" when Windows prompts you to restart the
system before checking the disk.
5. Select Start-> System Shutdown-> System Shutdown.
6. Turn PC power on.
7. Disk checking automatically starts.
8. After checking is complete, select “Menu->9.Settings-
>5.Connectivity->1.USB Mass Storage->Off.”
9. The “External Memory Mount Start ” popup window
appears when the MMC card is pulled out from and
reinserted into the phone, and then normal operation
starts.
 Windows XP
1. The new portable disk folder shows in Windows Explorer.
Right-click the mouse on the folder.
2. Select Properties->Tools->Check Now…
3. Check both “Automatically fix file system errors” and
“Scan for and attempt recovery of bad sectors” and click
Start.