User Manual

63
640X480 size.
1. Press the Scroll key ([▲/▼]) to zoom in/out of the image in the current
preview when the image size is 128X160. Press the Scroll key ([▲/▼])
to control the seven levels of brightness.
2. The phone saves the image automatically when the user presses the
[
] key. Press the [ ] key to return to the camera preview screen.
NOTE1: In Multi Capture mode, the photo can be named automatically only
if one photo is set as Marked. Select [Mark] or [Unmark] to check the
image that you want to save.
NOTE2: Image counter, which is located below image size, indicates the
number of photos that you can take. Image counter might not be accurate
depending on the types of objects and the level of brightness.
Tip: If you are taking photos while your phone is open, you can use the
following keys to adjust your phone’s camera directly.
Function Description Key
Brightness 7 levels (from 0 to 6)
Scroll key
[ / ]
Zoom
4 levels (from 0 to 3)
(only available in 128x128 size).
Scroll [ / ]
Using your camera options
The Preview mode
Press the [Options] Soft key ([
]) in Preview mode to select the
following information which will be applied to the image. Its setting value is
temporary, so if you want to save its value, press the [Menu] Soft key,
select 7.My Stuff > 7.Tools > 1.Camera > 5.Photo Settings.
• Take a Video: Moves to the Video Capture Mode.
• Go to Album: Moves to the Photo Album.
• Image Size: Displays the size of image that you want to shoot
LCD(128X160), QVGA(320X240), VGA(640X480), SVGA(800X600),
XGA(1024X768), SXGA(1280X1024),
NOTE: This option does not appear in Frame Capture mode.
• Image Quality: High, Medium, Low
• Effect: Applies one of the following effects to the picture:
Normal
Sepia
Solarization
Monochrome
Line Drawing
Negative
Embossing
NOTE: You cannot set Effect in 640X480 size.
• White Balance:
• Self Timer: Specifies the delay time. You can choose None, 5 Secs, or
10 Secs. When the selected time has lapsed, the camera takes a
photo.
• Display Icons: Turns the display icons On or Off.
The Single or Frame Capture mode
1. Press the [Options] Soft key ([
]) in Capture mode to select the