User's Manual

11
Getting Ready
2
[OK]
When the e-mail setup is completed, your e-mail address is displayed.
Setting au one-ID
You can register a new au one-ID or one you have obtained beforehand.
Set the au one-ID in common in your PTL21 and PCs, and save the ID and
password in your PTL21. By acquiring and saving an au one-ID, you can use
a variety of services provided by au, such as “au kantan payment method”.
1
On the Home screen, [ ] → [Settings] → [au one-ID
setting]
A screen about packet communication charges is displayed.
2
[OK] → [auone-IDの設定・保存] (au one-ID setting and
saving)
Tap “auone-IDとは？” (“What is au one-ID?”) to display an
explanation in the browser.
3
Enter the security code → [OK]
The security code is the four-digit number you wrote on your
subscription form. If the security code is incorrectly entered three
times consecutively during a single day, the setting operation will be
disabled until the next day.
■When registering your phone number as a new au one-ID
4
Enter the password → [利用規約に同意して登録]
(Iaccept the terms of service and register)
■When registering a new au one-ID different from you phone number
4
お好きなauone-IDを登
録したい方はこちら (To
register an au one-ID of
your choice)
Follow the instructions displayed on
the screen to perform a new
registration.
The newly registered au one-ID is set
in common in the PTL21 and the PCs.
取得済みのauone-IDを
設定したい方はこちら (To
set an au one-ID you
already obtained)
Your au one-ID is set in common in the
PTL21 and the PCs. Follow the
instructions displayed on the screen
to complete the procedure.
5
[設定画面へ] (Go to setting screen) → Follow the
instructions displayed on the screen.
Set the necessary information to reissue a password.
au IC-Card
An au IC-Card records your personal
information such as phone numbers.
◎ Follow the precautions below when handling the au IC-Card, otherwise it
may cause a malfunction or damage to the au IC-Card.
• Do not touch the IC (metal surface) part of the au IC-Card, or the IC-Card
terminal on the PTL21.
• Confirm the orientation before inserting the au IC-Card.
• Do not forcibly insert or remove the au IC-Card.
◎ Be careful not to lose the au IC-Card after when removing it.
Removing au IC-Card
Turn off the power and remove the battery pack before removing or