User's Manual

ADDING OR CHANGING AN EMAIL ADDRESS
To enter or add an Email address to a Contact entry:
1. From standby mode, press the Right Soft Key [Contacts], then
press the Directional Key up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight ”E-mail 1”
or ”E-mail 2”.
4. Enter an Email address, then press the OK Key
[SAVE] to save.
ADDING A SPEED DIAL ENTRY
To add an entry to Speed Dial:
1. From standby mode, press the Right Soft Key [Contacts], then
press the Directional Key up or down to highlight an entry.
2. Press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight the phone
number you want to add to Speed Dial, then press the Right Soft
Key [Options].
4. Select ”1. Set Speed Dial”, then press the OK Key
[OK].
5. Press the Directional Key
up or down to select a Speed Dial
location, then press the OK Key [SET].
6. Press the Directional Key
up or down to select ”Yes ” to save,
then press the OK Key [OK].
7. Press the OK Key
[SAVE] to save.
EDITING CONTACTS ENTRIES
ADDING A PHONE NUMBER FROM THE STANDBY MODE
1. From standby mode, enter the phone number you want to save
(up to 48 digits).
2. Press the Left Soft Key
[Save].
3. Press the Directional Key
up or down to highlight
”Update Existing”, then press the OK Key [OK].
4. Press the Directional Key
up or down to highlight the existing
Contact entry, then press the OK Key [OK].
5. Press the Directional Key
up or down to highlight the phone
number type, then press the OK Key [OK].
Mobile 1/Mobile 2/Home/Work/Fax
30 Chapter 3 − Memory Function
Memory FunctionMemory Function
6. If a phone number is already assigned to the item you selected,
press the Directional Key up or down to select ”Ye s” or ”No”,
then press the OK Key [OK].
7. “ CONTACT SAVED” displays, then the phone number reappears on
the screen. Press the End Key
to exit, or press the Send Key
to call the number.
ADDING A PHONE NUMBER FROM THE CONTACT LIST SCREEN
1. From standby mode, press the Right Soft Key
[Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key [Edit].
3. Press the Directional Key
up or down to highlight the phone
number field you want to add, enter the number, then press the
OK Key [SAVE] to save. A confirmation message appears.
DEFAULT NUMBERS
The phone number saved when a Contact is created is the Default
Number. If more than one number is saved in a Contact entry, another
number can be set as the Default Number.
The Default Number cannot be deleted. The entire Contact entry can be deleted or
another number can be assigned as the Default Number allowing you to delete the
original number and keep the Contact entry.
CHANGING THE DEFAULT NUMBER
1. From standby mode, press the Right Soft Key
[Contacts]. Your
Contacts display alphabetically.
2. Press the Directional Key
up or down to highlight the Contact
entry you want to edit, then press the Left Soft Key
[Edit].
3. Press the Directional Key
up or down to highlight the phone
number you want to assign as the Default Number, then press the
Right Soft Key [Options].
4. Press the Directional Key
up or down to highlight
”2. Set As Default”, then press the OK Key [OK].
5. Press the Directional Key
up or down to select ”Yes ”.
6. Press the OK Key
[OK]. A confirmation message appears.
7. Press the OK Key
[SAVE] to save.
Memory Function − Chapter 3 31
Memory FunctionMemory Function
080716_CDM8950_ECHO.indd 30-31080716_CDM8950_ECHO.indd 30-31 2008.7.16 4:1:13 PM2008.7.16 4:1:13 PM