User's Manual

New Contacts Icon
Mobile1 Group
Mobile2 Picture
Home Ringtone
Work Fax
E-mail 1 Message Ringer
E-mail 2 Speed Dial
Messages Icon
New/Unread Message
Unopened Message
Notification
Opened/Read Message
Opened Download
Picture Message
Message Delivered Corrupt Message
Incomplete Delivery
Pending Message
Send
Sent Message,
Delivery Failed
Unread MMS
Message Locked Read MMS
Text Message Draft Unread WAP Push
Picture Message Draft Read WAP Push
Priority
Multiple Message
Delivered
12 Chapter 1 − Before Using CDM8950
Before UsingBefore Using
Messages Icon
Multiple Message
Failed
Multiple Message
Pending
Multiple Message
Incomplte
Multiple SMS/MMS
Ack
INSTALL BATTERY
1. Remove the battery cover from the unit.
2. Slide the battery into the slot located at the
bottom of the unit and press until you hear
the “click”.
REMOVE BATTERY
1. To remove the battery, push down on the
top of the battery while inserting your
finger into the slot and pulling up from the
back of the battery and slide it out.
2. Align the cover tabs with the slots at the
top of the device and slide the battery cover
back onto the unit.
If the battery is not correctly placed in the compartment, the handset will not turn on
and/or the battery may detach during use.
Before Using CDM8950 − Chapter 1 13
Before UsingBefore Using
080716_CDM8950_ECHO.indd 12-13080716_CDM8950_ECHO.indd 12-13 2008.7.16 4:0:28 PM2008.7.16 4:0:28 PM