User Manual

Basic Call related Functions
1. Speed Dial
There are two ways to make a call in the initial screen. One is to press [Send] normally
after inputting a telephone number. The other is to use speed dial.
When making calls by using speed dial, you should press the index number for a moment
which is allocated when saved in the Phone Book of the unit. Then, the telephone number
matching the index number is attempted to be called. For example, if the index number
saved in the Phone Book of the unit is 5, press the number [5] key for a moment, then
the applicable telephone number will be attempted to be called. If the index number is a
double digit, press the double digit number and then press the [OK] key, then the
applicable telephone number will be attempted to be called. For example, if the index
number is 34, press the number [3] and [4], then press the [OK] key. Also for the speed
dial for index number ‘5’, you can make a call by pressing the number [0] and [5] key,
then press [OK]. The scope of the index available for speed dial is from 01 up to 99.
스피드 다이얼 1번은 voice mail, 9번은 emergency call (060)으로 default로 잡혀 있음
2. Making overseas calls
If you would like to make overseas calls, press the [0]key twice at first so that sign ‘+’
appears on the screen and then press the country code after the sign.
3. Making emergency calls
Input number 112 (emergency number: 060, 911도 해당됨) and press the [SEND] key. If
you belong to the GSM net, regardless of the existence of a SIM card, making emergency
calls is available in any country.
4. Hold calls
When you can not take a call for some reason, the unit displays a call message which
shows you have missed a call on the screen. If you would like to get back to any missed
calls, first select the [MENU]-[Call logs]-[Missed calls] keys in order. Then select a
number by using the [Up/Down] key that the user desires to get back, and press the
[SEND] key. A call will be made to the number selected.
5. Access to the Phonebook from the initial screen
You can move to the lower Menu of the unit by pressing the Down key of the Navigation