User's Manual

81
82
3. Sound
3
Press [ ] to save it.
2
Turn up and down with the navigation key.
You are to control the volume in 5 levels or mute the
ringer.
2
Check into “On” or “Off”, press [ ] to save it.
1
Press [ ][ ][ ] to mute or activate
sound and tone.
1) Bell Volume
2) Silent
Bell Volume
[OK] [Back]
1 Bell Volume
2 Silent
3 Increasing Bell
4 Bell Signals
5 Alarm Signal
6 Vibrating Alert
[Select] [Back]
Sound Settings
2
Check into “ON” or “OFF”
Press [ ] to save it.
1
Press [ ][ ][ ] to activate or deactivate
an increasing bell.
2
You are to see the two items displayed as below.
3) Increasing Bell
1
Press [ ][ ][ ] to assign a melody to a phone number.
4) Bell Signals
[OK] [Back]
On
Off
Increasing Bell
You can choose a ring signal from a list of different sounds and melodies.
1
Press [ ][ ][ ] to adjust bell volume.
The bell volume can be set to 5 levels.
You can also turn the bell volume off(0)
You can choose a ring signal that rises in steps from the lowest volume
to the highest.
2
Check into one of the following items with the navigation key and
press [ ] to go to submenu. (Bell/Classic1/Classic2/Carol/Nature)
1
Press [ ] to allow the same melody or bell to all incoming calls.
ALL VOICE CALLS
GA-160-8-13영문 2003.8.16 10:15 AM 페이지81