User's Manual

82
83
01
02
03
05
06
07
04
•TOOLS
next setting.
•
MENU LAYOUT: Select Grid or Shortcuts, then tap Exit or tap Skip to go to the next setting.
•
MENU TYPE: Select Multimedia, Personalize, Messaging, Productivity or Communicator,
then tap Exit. or tap Skip to go to the next setting.
•
CLOCK FORMAT: Select Analog, Large Analog, Digital 12, Large Digital 12, Digital 24, Large
Digital 24 or O, then tap Exit or tap Skip to complete set-up.
TOOLS
VOICE COMMANDS
Your phone is equipped with an Advanced Voice Commands (AVC) feature. This feature
allows you to make calls or use the phone’s functions by simply using your voice. All
you have to do is talk into the phone and then the phone will recognize your voice and
complete tasks by itself.
1. To access Voice Commands from idle mode, slide the phone up, tap Tools , and
Voice Commands .
2. The phone displays the Voice Commands menu and prompts you to say the
name of the command you want to use. To complete your task, simply follow
the voice prompts. You can speak the name of the command after you hear
a beep.
3. Select one of the following options.
Call <Name or #> / Send <MSG Type> / Go To <Shortcut> / Check
<Item>
/ Contact <Name> / Search / Redial / Play <Playlist> / My
Verizon
/ Help
To view information about each option, tap Info. Tap Settings to access Voice
Commands Settings. Please refer to page xx for more details on Voice Commands
Settings.
4. When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, AVC mode will turn itself o.
CALL <NAME OR #>
Use the Call command to voice dial a name from your Contact List or a phone number.
When dialing a number, pronounce each digit, but do not pause noticeably between
the digits.
1. You will hear Please say a command and the Voice Commands menu will be
displayed.
2. If calling a contact from your Contact List, say Call <Name>. Your phone will
ask you to conrm the name you said. Say “
Yes “ if it was repeated correctly.
That phone number will be dialed. If there is more than one number saved for
that contact, you will be asked to conrm which number to dial.
Examples: Call John Work
CALL <MSG TYPE>
Use the Send command to send a text or other type of message to a specied name
or number.
1. You will hear Please say a command and the Voice Commands menu will be
displayed.
2. Say “
Send “ followed immediately by Text, Picture, Video or Voice Message.
Examples: Send text message to Bob
GO TO <SHORTCUT>
Use the Go To command to open an application on your phone. You can say “ Go To ”
by itself and be prompted to say the application name, or you can skip the prompt by
saying ”
Go To ” followed by the application name.
1. You will hear Please say a command and the Voice Commands menu will be
displayed.
2. To access a menu within the phone, say “
Go To ” followed by the menu.
Examples: “Go To Calendar”. If no menu option is stated, a list of options will
be provided.