User's Manual

86
87
01
02
03
05
06
07
04
•TOOLS
1. In the Home Screen, tap Tools , and Voice Commands .
To view information about each option, tap Info.
2. Tap Settings and then tap Conrm Choices .
You can also access Voice Commands Settings, tapping Settings & Tools, Phone
Settings, Voice Commands Settings, and Conrm Choices in the Home Menu.
3. Select Automatic , Always Conrm or Never Conrm .
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages “
Please try again ” or “ COMMAND
NOT RECOGNIZED Try again?
”, adjust the sensitivity toward Less Sensitive . If you
frequently experience false activations (when the phone recognizes a name you
didn’t say), adjust the sensitivity toward
More Sensitive .
1. In the Home Screen, tap Tools , and Voice Commands .
2. Tap
Settings and then tap Sensitivity .
3. Select
More Sensitive , Automatic or Less Sensitive .
ADAPT VOICE
Voice Commands are speaker independent, which means that no training
or adaptation is required. Some users with heavy accents or unusual voice
characteristics may nd diculty in achieving high accuracy with speaker
independent Voice Commands, so the Adapt Voice feature allows users to
dramatically improve the recognition accuracy after adapting their voices. Users who
get acceptable recognition accuracy will nd no additional benet to performing the
Adapt Voice feature.
1. In the Home Screen, tap Tools , and Voice Commands .
2. Tap
Settings and then tap Adapt Voice .
3. Tap
Train Voice or Reset Voice .
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
•
Reset Voice: Once you nish the adaptation process, you can reset the adaptation to
the factory default. The reset Voice option only appears after you nish the Train Voice
process.
4. “Adaptation will take a couple of minutes to complete. Adapt in a
quiet room. Select OK to begin.” will appear on the screen. Wait for the
beep, and then repeat the sentences using a normal tone of voice.
5. When you are nished with a full session, you will reach a screen that reads
“
Adaptation Complete ”.
PROMPTS
Allows you to select voice command system characteristics.
1. In the Home Screen, tap Tools , and Voice Commands .
2. Tap
Settings and then tap Prompts .
3. Select
Mode , Audio Playback or Timeout .
• Mode: Select the voice command system mode from the following:
- Prompts: For handset to prompt for required information.
- Tones Only: For handset to provide beeps only for audio guidance.
•
Audio playback: Allows audio playback to play through the speakerphone or earpiece.
Select Speakerphone or Earpiece.
•
Timeout: Select a period of time either 5 seconds or 10 seconds which the system
listens for a command before timing out.
4. Tap an option you want.
ABOUT
1. In the Home Screen, tap Tools , and Voice Commands .
2. Tap
Settings and then tap About .
3. The Nuance version appears.
4. To return to the previous screen, tap
Back .