P1010 USER MANUAL 1
FCC Regulations: for compliance could void the user„s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject The antenna(s) used for this transmitter must not be co-located or to the following two conditions: (1) This device may not cause harmful operating in conjunction with any other antenna or transmitter. interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.31 W/g for GSM850 / 1.31 W/g for PCS1900 and when worn on the body, as described in this user guide, is 1.18 W/g for GSM850 / 0.651 W/g for PCS1900 (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.
Thank you for choosing our Pantech P1010 mobile phone. The user guide contains important information about using your handset. Please read the manual thoroughly, pay attention to the safety information and warranty on the back page and be alert to the exclusions and limitations of your warranty, related to the use of unauthorized components. Some information in this manual may differ from your phone, depending on your software version and network provider.
Contents 1. Getting Started .................................................... 7 Phone overview ....................................................................................... 8 Menu overview......................................................................................... 9 SIM card and battery ............................................................................... 11 Turn on/off the phone ..............................................................................
5. Useful Features ................................................. 36 8. Appendix............................................................. 46 Calendar .................................................................................................. 37 Error message ......................................................................................... 47 Alarm ....................................................................................................... 37 Troubleshooting checklist ..
1.
Phone overview Left /Right Soft key Perform the functions shown Camera at the bottom line of the display. Earpiece Left Soft key Four-way menu navigation and short cuts OK key USB Slot Scroll through the menu options. Press for confirmation or launch the WAP directly.
Menu overview 1 2 3 4 Games 1.1 Java 2.1 Java settings 3.1 Java default security 4.1 Games 5 Messages* 1.1 Write message 2.1 Inbox 3.1 Drafts 4.1 Outbox 5.1 Sent messages 6.1 Delete messages 7.1 Broadcast message 8.1 Templates 9.1 Message settings TELCEL* Contacts 1.1 Quick search 2.1 Add new contact 6 3.1 Speed dial 4.1 Caller groups 5.1 Call history 6.1 My number 7.1 Extra numbers 8.1 Contacts settings Portal Ideas** 1.1 Homepage 2.1 Bookmarks 3.
7 8 9 Organizer 1.1 Alarm 2.1 Calendar 3.1 Notes 4.1 World clock 5.1 Sound recorder 6.1 Calculator 7.1 Unit converter 8.1 Stopwatch Settings 1.1 Display 2.1 User profiles 3.1 Call settings 4.1 Phone settings 5.1 Network settings** 6.1 Security settings* 7.1 Software version 8.1 Restore factory settings File manager * SIM dependent ** Network dependent .
To install/remove battery SIM card and battery 1. Remove the battery cover from the unit. About your SIM card 2. Put the contacts of the battery into the hole When you subscribe to your network operator, you receive a SIM located at the up of the unit insert(1) and press (Subscriber Identity Module) card containing your registration information, the bottom side(2) of the battery until you hear PIN code, etc. the “click”. About your battery 3.
Keypad lock Battery performance Battery Type Standard Lithium-Ion (Li-ion) Capacity TBD Standby Time TBD Talk Time .TBD 1 To lock the keypad 1. Press and hold [ ]. To unlock the keypad Turn on/off the phone 1. Press Unlock > [ OK ]. To turn on 1. Press and hold [ ]. To turn off Memory card You can use microSD card as memory card. It gives you space to save 1. Press and hold [ ]. Display indications Essential icons pictures, videos, music and etc. Inserting and removing the memory card 1.
Using memory card Entering text You can save, move and delete the files in your external memory card. You You can enter text with multitap, predictive, numeric or symbol. can also move and copy the files to computer from your external memory card. Useful keys [ ] To copy the file to the card 1. Select the file > Options > Copy. 2. Select Memory card [ ] To move the file to the card 1.
linguistic dictionary to determine the correct word. It will appear the most commonly used word first. 1. Press and hold [ 2. Press [ press [ ] to change the mode as T9 ] to input text. For example, to write „hello‟ ] to [ ][ ][ ][ ][ ]. Multi-tap input mode Press the key labeled with the target letter once for the first letter; press it twice for the second letter, and so on. 1. Press and hold [ 2. Press [ press [ ] to change the mode as multi-tap. ] to input text repeatedly.
2.
To make a call during a call 1. Enter the phone number or look it up in Contacts. Making, receiving & ending a call 2. Press [ To make a call hold. 1. Enter the area code and phone number. 2. Press [ ] to dial the second call. The first call is automatically put on To make an international call ] key. 1. Press and hold [ To answer a call 1. Press [ ] key for the international prefix until the „+‟ character appears. 2. Type the country code, area code, and phone number. ]. 3. Press [ ].
Options during a call To switch between two calls Microphone off and on 1. Select Options > Swap. 2. Press OK. To switch your phone’s microphone off Multi-party calls** 1. Press Mute. You can talk with more than one person or conference call. To switch your phone’s microphone back on To make a multi-party call 1. Press Unmute. To talk on speaker 1. Press . To record voice during a call 1. Select Options > Sound recorder. 1. Call the first participant. 2. Call the second participant.
To find a name manually in address book 2. Select divert option. 3. Select Activate > To new number / To voice mail. 1. Press the [ / ] key. 4. Press OK. To view the details of highlighted entry in address book For voice mail number setting, see page 24. 1. Press OK. To cancel call forwarding** For the address book, see page 17. You can cancel call forwarding. 1. Press Menu > Settings > Call settings > Call divert. To read a message during a call 2. Select divert option. 3.
2. Select On or Off. To delete call logs To answer with any key press 1. 1. Press Menu > Settings > User profiles > select a profile To view total call time 2. Press Options > Customize > Answer mode 3. Select Any key. 4. Press OK. NOTE: you can answer with any key except [ Press Menu > Contacts > Call history > Delete call logs. 1. Press Menu > Contacts > Call history > Call time. 2. To reset press Reset all > Yes. ] and Reject. To view data transmitted information Checking all calls 1.
To set speed dial To view contacts list 1. Press Menu > Contact > Speed dial 1. Press Menu > Contacts > Quick search 2. Select an empty entry and press Edit. 3. Select a person and number > OK. To update speed dial 1. Select a number and press Options > Edit. To search for a phone number 1. Press Menu > Contacts > Quick search 2. Input a name. 3. Press OK to view detail information. 2. Update information and press OK. To remove from speed dial To call from contacts list 1.
To edit a groups Service number & fixed number 1. Press Menu > Contacts > Caller groups. To call your service numbers* 2. Choose Group to edit 3. Press OK You can see the service number to reach the service provider. 1. Press Menu > Contacts > Extra numbers >Service dialing number. Call waiting & caller identification 2. Select a number > press [ ]. To activate call waiting** 1. Press Menu > Settings > Call settings > Call waiting. 2.
3.
To move the message to phone Messages 1. Press Menu > Messages > Inbox. 2. Select a message > Options > Advanced > Move to phone. You can send, receive and save the text message and multimedia message. To delete message in each mailbox Managing memory 1. Select a message > Options > Delete > Yes. You can save up to 100 messages in the phone memory. You can move or copy text message to SIM card. Multimedia message will not be copy to To reply the message SIM card.
To read message using inbox 1. Press Menu > Messages > Inbox > OK. 2. Press Options > Call voicemail It will automatically call to the voice-mail center. 2. Select a received message > OK. To view cell broadcast messages To save new numbers from received message 1. Select a new number of the received message. 2. Press Options > Advanced > Use number > Save to Contacts. 1. Press Menu > Messages > Broadcast message 3.
Message templates To add saved sound on the message When you often use same phrases you can save the message for template 1. Press Options > Add sound message. 2. Select a sound > OK. 3. Write the message. To edit the saved template message To add saved video on the message 1. Press Menu > Messages > Templates > Text message 2. Select the message 1. Press Options > Add video 3. Press Options > Edit. 2. Select video > OK. 3. Write a message.
To set text message setting Setting voice message 1. Press Menu > Messages > Message settings. To set receiving voice mail 2. Select Text massage. 3. Set each option > OK. NOTE: The message format depends on the SIM. 1. Press Menu > Messages > Message settings > Text message > Voicemail server. 2. Press Option > Edit 3. Enter the name and number of the voice mail center. To set profiles for multimedia message 4. Press OK. 1. Press Menu > Messages > Message settings. 2.
4.
Icons for camera Icon Camera Name Description Camera Mode Zoom x1, x2,x3 -4, -3, -2, -1 Brightness 0 +1, +2, +3, +4 You can take pictures and record movies using built-in camera. The photos and video clips can be saved and sent using multimedia message. White balance Scene mode Settings for camera Delay timer Camera mode Storage Video mode Icons Name Size Quality Effect Cont.shot Brightness Zoom Back Options Recording/Pause To set camera settings 1.
Resolution Shutter sound Anti-flicker Advanced Settings Image quality Storage 160x128 320x240 640x480 800x600 1280x1024 Sound1, Sound2, Sound3, Off 50Hz, 60Hz Low Normal High Phone Memory card White balance Night mode Shutter sound Anti-flicker Advanced Settings Video quality Restore default Auto Daylight Tungsten Fluorescent Cloudy Incandescent Off On On, Off 50Hz, 60Hz Low Normal High Restore default Icons for video Icon Name Video Mode Description Zoom x1, x2, x3 -4, -3, -2, -1 0 +1, +2, +3
To take a picture To record a video 1. 1. Press Menu > Multimedia > Video recorder Press Menu > Multimedia > Camera 2. Put the camera where to record > press OK. 2. Focus on the object > press OK or NOTE: Your photo will be saved automatically to File manager > Driver > 3. Press [ ]. NOTE: Your video will be saved automatically to File manager > Memory Fotos. card > Videos. To change to video camera mode To set video settings 1. Press Menu > Multimedia > Camera 2. Press [ 3.
3. Select a picture. During recording a video To Receive an incoming call Stop recording Pause recording Press [ ] 4. Press Options > Copy or Move 5. Select target folder OK, Deactivate pause To send pictures using multimedia message 1. Press Menu > Multimedia > Image viewer Pictures album 2. Select a picture. 3. Press Options > Send > As multimedia message You can view, send, and delete the saved pictures. The supported formats are JPEG, GIF, BMP, WBMP and PNG.
To play loop the video clip To use sound controls 1. Press Options > Repeat To Play & Pause Stop Rewind 2. Select On Press OK Stop, Back Hold To move or copy a video to other folder Fast forward Control volume Hold Navi key up or down 1. Press Menu > File manager 2. Select driver > Video 3. Select video clip 4. Press Options > Copy or Move 5. Select target folder To set as a ringtone 1. Press Menu > File manager 2. Select driver > Musica. 3.
4. Press Options > Send > As multimedia message Audio/Video player You can play MP3s and video clips with the audio/video player. . Long press - Fast rewind Short press - Next track Long press: - Fast forward Pause Fast forward Play Play Pause Play All Play Once NOTE: Do not use this feature illegally. Sound and video can be protected Repeat One Repeat by copyright. It is illegal to copy such sound / video tracks for the purpose Repeat All - of selling or distribution.
3. Select a mode > OK Audio Player settings To set background play To set all files to play automatically 1. Press Menu > Multimedia > Audio player. 1. Press Menu > Multimedia > Audio player 2. Press Options. 2. Press Options. 3. Select Background play > On 3. Select List auto gen > On 4. On audio player, press 5. You can see all MP3 files on Musica folder in phone or memory card. To set spectrum 1. Press Menu > Multimedia > Audio player. 2. Press Options > Spectrum display.
FM Radio To add a channel to channel list automatically You can listen to the radio and record it using built-in FM radio function. 1. Press Menu > Multimedia > FM radio. Before you hear the FM radio, you should connect your headset to the jack. 2. Press Options. 3. Select Auto search NOTE: The FM radio quality depends on your area. To add a channel to channel list manually 1. Press Menu > Multimedia > FM radio. 2. Press Options > Channel list. Channel Time Volume controls 3.
5.
registration. 4. Calendar Input the events > OK. NOTE: You can create up to 50 events including schedule, task and Calendar helps you manage your schedule including your time for calls or Note. You can create events for dates from 01/01/1970 to 12/31/2030. special days. You can set alarms service on a set date with this function. Alarm To view calendar 1. Press Menu > Organizer > Calendar. To set an alarm NOTE: Monthly view is displayed as default. 1. Press Menu > Organizer > Alarm. 2.
Stopwatch, calculator & converter Notepad & sound recorder To use stopwatch To use notepad 1. Press Menu > Organizer > Stopwatch. 1. Press Menu > Organizer > Notes. 2. Select split time or lap time. 2. To create new memo press Add or Options > New note. 3. Press Start. 3. To edit memo press Options > Edit. To use the calculator 1. Press Menu > Organizer > Calculator. To record sound 1. Press Menu > Organizer > Sound recorder 2. Use [ / / / /OK] to calculate. 3.
To send my number 1. Press Menu > Contacts > My number. 2. Press Options > View > select a schedule 3. Press Options > Send vCalendar > As text/multimedia message 2. Press Send my number > As text/multimedia message 3. Press OK To update information To update information 1. Press Menu > Organizer > Calendar. 1. Press Menu > Contacts > My number. 2. Press Edit my number. 3. Update information. 4. Press OK. 2. Press Options > View > select a schedule. 3. Press Options > Edit 4. Update information. 5.
6.
To view visited sites Using the internet 1. Press Menu > Portal Ideas > Recent pages. 2. To open, press Options > Go to. To access internet 1. Press Menu > Portal Ideas > Homepage. To set the security NOTE: It will access your Wireless Web service provider‟s homepage. 1. Press Menu > Portal Ideas > Settings > Service message settings. To set new bookmarks 1. Press Menu > Portal Ideas > Bookmarks. To clear cookies, cache and history 2. Press Options > Add bookmark. 1.
3. Press Options > Edit profile Connect to PC To connect to PC 1. Connect the data cable with mobile and the computer 2. Press Mass storage 3. Follow the instruction on your computer screen. 4. To disconnect, disconnect the data cable To set connection for port 1. Connect the data cable with mobile and the computer 2. Press COM port To use webcam 1. Connect the data cable with mobile and the computer 2. Press Webcam 3. Run PC webcam application. 4. Follow the instruction on your computer screen.
7.
3. Select keypad tone 4. Press OK Date & time To set up 1. Press Menu > Settings > Phone settings > Time and date. 2. Set each option > OK. To set volume 1. Press Menu > Settings > User profiles > select a profile 2. Press Options > Customize > Volume Language To set up Display 1. Press Menu > Settings > Phone settings > Language. To set the display 1. Press Menu > Settings > Display Ringtones & alerts & tones To set ringtones 1.
Network NOTE: PIN code is dependable by your SIM To select network To change PIN 2 1. Press Menu > Settings > Network settings > Network selection > 1. Press Menu > Settings > Security settings > Change password > Selection mode PIN2. 2. Select Automatic or Manual. NOTE: PIN2 code is dependable by your SIM. To enable fixed dialing Locks To lock the phone 1. Press Menu > Settings > Security settings > Phone lock. To enable Press Menu > Settings > Security settings > Fixed dial.
8.
open area. If you still cannot make a connection, contact the nearest carrier. Error message Troubleshooting checklist If you experience any problem while using your mobile phone, please refer to the following checklist. If the problem still persists, contact your dealer or When audio quality is poor: nearest carrier. End a call and try again. When the “Insert SIM” message appears: When the other party cannot hear you speaking: Make sure the SIM card is correctly installed.
operating temperatures. Temperatures higher than 55°C (131°F) or lower than -20°C (-4°F) may damage your phone. When you are unable to charge the battery: This may be the result of one of the following three cases. Do not use or store your mobile phone in dusty, dirty areas. 1. Your charger may be out of order. Contact your nearest dealer. Do not attempt to disassemble your mobile phone. 2.
Switch off in restricted areas Mobile phones and other electronic devices Always switch your phone off in areas where mobile phone use is restricted. Mobile phones emit electromagnetic waves that may affect nearby electronic devices. When it is switched on, do not place your phone close Switch off in explosive or dangerous areas to delicate electronic equipment.
Do not short circuit a battery or allow metallic conductive objects to contact battery terminals. Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard. Promptly dispose of used batteries in accordance with local regulations Battery usage by children should be supervised. Avoid dropping the phone or battery.
accordance with the instructions, may cause harmful interference to radio This EUT has been shown to be capable of compliance for localized communications. However, there is no guarantee that interference will not specific absorption rate (SAR) for uncontrolled environment/general occur in a particular installation. If this equipment does cause harmful population exposure limits specified in ANSI/IEEE Std. C95.
