User's Manual

15
2. Displays
This phone has 1 display, and icons on the top of the display
indicate the phone status.
Icon(s) Description
Shows received signal strength.
The more the number of bars, the stronger the signal.
A call is being made.
Outside the coverage area, you cannot make or receive a call.
Speaker phone is enable during call state.
You have a new voice mail.
WAP is connected
You have a new push message. Select and check a message
from the push message list to contact the WAP page concerned
You have a new message. If the inbox list is full, the icon
will look like .(Common) (In Mexico If the inbox list
and SIM memory are full, the icon will look like
.Common In Mexico
Out of the home network range.
When a GPRS session is in progress, the icon will look like
.
Call forwarding feature is activated,
You have set the alarm.
You have set the alert type for incoming call to ring only.
You have set the alert type for incoming call to ring ascent.
You have set the alert type for incoming call to ring and vibrate.
You have set the alert type for incoming call to vibrate then ring.
You have set the alert type for incoming call to quiet
You have set the alert type for incoming call to vibrate only.
You have set the alert type for all tones to be quiet and for all
rings to vibrate only.
Headset is connected.
Battery level. The bar indicates the available battery
charge. If your battery charge is low, this icon will look like
Display Off Mode.
If you do not press any key within 10 secs while the display is dimmed,
the display goes into Off Mode to save power. Press any key to restore
the display.
Icons Area
Text and Graphic Area
In standby screen, displays textural and
graphical information showing Network
Name, Time & Date, or a Greeting put by the
user
Softkeys