User's Manual

CHARGING YOUR BATTERY

1. To charge the phone, open the Charging/Data Jack cover on the top left

side of the phone, and connect the charger

adapter.

2. Plug the other end into a standard outlet.

3. To remove the adapter connection,

squeeze the adapter’s side buttons (1) and

pull.

Note :

y When you charge the battery with the phone power off, you will see a

charging status screen. You cannot operate the phone until it is

powered on.

y The battery is not fully charged at the time of purchase. Fully charge

the battery before use.

y It is more efficient to charge the battery with the handset powered off.

y Battery operating time gradually decreases over time.

y If the battery fails to perform normally, you may need to replace the

battery.

BATTERY HANDLING INFORMATION

DO’S

y Only use the battery and charger approved for use with the TXT8030.

y Only use the battery for its original purpose.

y Try to keep batteries in a temperature between 41 °F (5 °C) and 95 °F

(35 °C). If the battery is stored in temperatures above or below the

recommended range, give it time to warm up or cool down before

using.

y Store the discharged battery in a cool, dark, and dry place.

y Purchase a new battery when its operating time gradually decreases

after fully charging.

y Properly dispose of the battery according to local laws.

DON’TS

y Don’t attempt to disassemble the battery – it is a sealed unit with no

serviceable parts.

y Don’t accidentally short circuit the battery by carrying it in your pocket

or purse with other metallic objects such as coins, clips and pens. This

may critically damage the battery.

y Don’t leave the battery in extremely hot or cold temperatures.

Otherwise, it could significantly reduce the capacity and lifetime of the

battery.

y Don’t dispose of the battery by placing into a fire