User's Manual

42
Note: You do not need to input the passkey for pairing when the
passkey of the Bluetooth® Headset or hands-free kit is 0000.
7. The handset will prompt you with the following message on the LCD
screen: [Device Name] Before Connecting. If you would like to always
confirm before connecting to the Bluetooth® device, select Always Ask,
then press the OK Key [OK]. Then the handset will prompt you with the
message Connect to [Device Name]. Select Yes, then press the OK Key
[OK]. If you do not wish to confirm every time before connecting to the
Bluetooth® device, select Always Connect, then press the OK Key [OK].
8. Once connected, you will see the device listed in the Bluetooth Menu
and the Bluetooth® device connected icon will appear at the top of the
LCD screen when connected to the Bluetooth® device. You can also
check out the connection with an Arrow icon on the Bluetooth Menu.
Note:
y In the Bluetooth Menu, you can disconnect the connected device with
an icon by pressing the OK Key [Drop]. Conversely, you can
reconnect by pressing the OK Key [OK] again.
y When an audio device is connected, you can select another device
and the connection is automatically transferred from that audio device
to the other one.
y If multiple devices are displayed, select the devices you want to
connect.
OPTIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad, then
press the OK Key [MENU], select SETTINGS & TOOLS, then swivel to
the QWERTY keypad, and press 3. Bluetooth Menu.
2. Press the Directional Key up or down to select the paired device.
3. Press the Right Soft Key [Options].
4. Press the Directional Key up or down to select one of the following
options, then press the OK Key [OK].
y Remove Device: Removes a device from the pairing list.
y Rename Device: Renames a paired device.
y Incoming Security: Sets permissions for connecting an incoming
device.
y Service Discovery: To search for the services that the selected
device supports.
y Send Name Card: Send name cards stored in Contacts to a selected
device.
y Send Picture: Send photos stored in Pictures to a selected device.
y Get Name Card: Get name cards from the selected device.
y Device Info: Displays device information.
SETTINGS
MY PHONE NAME
To edit the Bluetooth® name of your phone:
1. From standby mode, press the OK Key [OK] to unlock the keypad, then
press the OK Key [MENU], select SETTINGS & TOOLS, then swivel to
the QWERTY keypad, and press 3. Bluetooth Menu.
2. Press the Right Soft Key [Options].
3. Press 1. My Phone Name.
4. Use the numeric keypad to enter a new custom name.