User's Manual

56
then swivel to the QWERTY keypad and press 6. Phone Settings,
9. NAM Selection.
2. Press the Directional Key up or down to select 1. Auto NAM, then
press the OK Key [OK].
3. Select On or Off, then press the OK Key [OK].
CHANGE NAM
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 6. Phone Settings,
9. NAM Selection.
2. Press the Directional Key up or down to select 2. Change NAM,
then press the OK Key [OK].
3. Select NAM 1 - VERIZON or NAM 2 - VERIZON , then press the
OK Key [OK].
CALL SETTINGS
ANSWER OPTIONS
To determine how to handle an answered call:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 7. Call Settings, 1.
Answer Options.
2. Press the Directional Key up or down to select Any Key or Auto
w/ Hands-free, then press the OK Key [MARK].
Note: Any Key is the default setting for this device.
3. Press the Left Soft Key [Done].
z When the phone is closed, the Auto w/ Hands-free mode will
not function, except when a headset isconnected.
z The Auto w/ Hands-free will function after about five
seconds.
z Auto w/ Hands-free is available only when a headset or
hands-free device is connected.
z The two functions can be used at the same time.
z To answer all incoming calls, press the SEND Key.
AUTO RETRY
To set the length of time the phone waits before automatically redialing a
number when the attempted call fails:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 7. Call Settings, 2.
Auto Retry.
2. Press the Directional Key up or down to select the following
settings, then press the OK Key [OK].
10 Seconds / 30 Seconds / 60 Seconds / Off
TTY MODE
You can attach a TTY device to your phone enabling you to communicate
with parties also using a TTY device. A phone with TTY support is able to
translate typed characters to voice. Voice can also be translated into
characters and then displayed on the TTY.