User's Manual
72
the Left Soft Key to select am or pm and then press the
Directional Key down.
5. Under End Date, use the keypad to change or enter the end date
and then press the Directional Key down.
6. Under End Time, use the keypad to set a end time and press the
Left Soft Key to select am or pm.
7. To save a DST setting, press the OK Key [SAVE].
NOTEPAD
Your phone includes an internal notepad that can be used to compose and
store reminders and notes. To create a note:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 2. Tools, 9.
Notepad.
2. Press the Left Soft Key [New] to write a new note. When you are
done, press the OK Key [SAVE].
VIEW SAVED MEMO
To view a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 2. Tools, 9.
Notepad.
2. Press the Directional Key up or down to select a note, then press
the OK Key [VIEW] to view a selected note.
ERASE SAVED MEMO
To erase a saved memo:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 2. Tools, 9.
Notepad.
2. Press the Directional Key up or down to select a noet then press
the Right Soft Key [Options] then select Erase.
3. Press the Directional Key up or down to select Yes then press the
OK Key [OK].
ERASE ALL SAVED MEMOS
To erase all saved memos:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
then press the OK Key [MENU], select SETTINGS & TOOLS,
then swivel to the QWERTY keypad and press 2. Tools, 9.
Notepad.
2. Press the Right Soft Key [Options], then select Erase All.
3. Press the Directional Key up or down to select Yes then press the
OK Key [OK].
USB MASS STORAGE
The USB Mass Storage allows you to transefer files from or to your PC. In
order to use this option, you must inset microSD memory card and connect
to PC with data cable.