TXT8035PP UML290 5U000436C0A REV.
User Guide TXT8035PP
CHAPTER 1. BEFORE USING BEFORE USING ..............................................................................................9 INSIDE THE PACKAGE...............................................................................................9 HANDSET DESCRIPTIONS ......................................................................................10 DISPLAY INDICATORS ............................................................................................14 INSTALL BATTERY ........................
RECEIVED.............................................................................................................. 61 DIALED.................................................................................................................. 62 BLOCKED............................................................................................................... 62 ALL........................................................................................................................ 63 VIEW TIMERS......
CHAPTER 7. SAFETY AND WARRANTY SAFETY ......................................................................................................131 SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES............................ 131 SAFETY INFORMATION FOR FCC RF EXPOSURE ................................................. 136 SAR INFORMATION............................................................................................. 137 HEARING AID COMPATIBILITY (HAC) FOR WIRELEWSS TELECOMMUNICATIONS DEVICES .........
1 INSIDE THE PACKAGE BEFORE USING This package should include all items pictured below. If any are missing or different, immediately contact the retailer where you purchased the phone.
HANDSET DESCRIPTIONS 15 19 14 1 2 3 13 18 12 17 11 10 9 16 4 5 6 8 7 1. Left Soft Key: From idle mode, press to display the Message menu or access the function listed above the key. 2. SEND Key: Press to make or receive a call. From idle mode, press to access the All Calls list. 3. Speakerphone Key: Press to turn Speakerphone On or Off. 4. Favorites/Mode Change Key: Press to access the Favorites menu. In text entry mode, press to change the character input type. 5.
*. Internal Antenna Area HANDSET DESCRIPTIONS 25 21 01 22 02 20 03 24 Holding the device by the internal antenna area might affect the quality of all calls. 23 04 05 06 07 * 20. Camera Lens: The lens of your built-in camera. 21. Self-Portrait Mirror: Displays your reflection when taking pictures 22. External Speaker: Music, Ringtones and Sounds are played through the speaker. 23. AVC Key: From idle mode, press and hold to access the VOICE COMMANDS menu. 24.
DISPLAY INDICATORS Icon Icon Descriptions Location On: GPS is set to On for Location Service and E911 calls. Keypad Lock: Indicates the keypad and external keys are locked. 01 D Signal Strength: Indicates your phone is receiving digital data. More bars indicate a stronger signal. Bluetooth: Indicates Bluetooth® mode. 02 Bluetooth Active: Indicates Bluetooth Active mode. 03 Airplane Mode: Transmitting and receiving information is restricted. Roaming: The phone is outside of the home service area.
Recent Call Icons Dialed Call Received Call Message Icons Missed Call New Contact Icons Mobile1 Group Mobile2 Picture Home Ringtone Work Message Tone Email 1 Fax Email 2 Unread EMS Corrupt Message Read EMS Pending Message Send 01 New/Unread Message Unread MMS 02 Opened/Read Message Read MMS 03 Message Delivered Sent Message Incomplete Delivery Sent Message, Delivery Failed Message Locked Received Message 04 Unread WAP Push Text Message Draft Read WAP Push Multiple Message Deli
INSTALL BATTERY REMOVE BATTERY 1. Insert your fingernail into the slot(1), then push down on top of the battery cover and slide it off to remove (2). 1. To remove the battery cover, insert your fingernail into the slot(1), then push down on top of the battery cover and slide it off (2). 2. Slide the battery into the slot (3) by aligning the contacts and push down (4) until you hear the “click”. Correct 2. Insert your fingernail into the slot (3) and lift the battery from the compartment (4). 3.
3. To remove the Wall Charger, pull the charger from the device. • When you charge the battery with the handset powered off you will see a charging status screen. After the charging has completed, the Charge Complete message appears. You cannot operate the phone until it is powered on. To turn your phone on, press and hold the END Key until your display turns on. • The battery is not fully charged at the time of purchase. Fully charge the battery before use.
2 TURNING THE PHONE ON/OFF TURNING THE PHONE ON BASIC OPERATION This chapter addresses and explains the basic features for TXT8035PP including: Turning the Phone On/Off Accessing the Menu Quick Switching Between the Main Menus Menu Summary Making a Call Answering Calls Missed Call Notification Pause/Wait Feature Making an International Call 3-Way Calling Call Waiting Function Calling a Number from Contacts Adjusting Volume Caller ID Function Vibrate Mode Speakerphone Mode Using Auto Keypad Lock Function
QUICK SWITCHING BETWEEN THE MAIN MENUS While a menu is being accessed, you can quickly switch between the other menu options. 1. Press the OK Key [MENU], then select a desired menu from the following main menus: Media Center, Messaging, Contacts, Calendar, My Pictures, Recent Calls, VZ Navigator, Settings & Tools. 2. Press the OK Key. 3. Once a menu is selected, press the Directional Key left or right to switch between the menus. MENU SUMMARY Main Menu 1. Media Center 2ND DEPTH 1.
Main Menu 2. Messaging 2ND DEPTH 1. New Message 2. Message 3. Drafts 4. Voicemail 5. Mobile IM 6. Email 3. Contacts 4. Mobile Email 5. My Verizon 6. My Pictures 7. Recent Calls 8. VZ Navigator 26 7. Chat 1. New Contact 2. Contact List 3. Backup Assistant 4. Groups 5. Speed Dials 6. In Case of Emergency 7. My Name Card 1. Mobile Email 2. Mobile Web Mail 1 1 1. Missed 2. Received 3. Dialed 4. Blocked 5. All 6. View Timers Launch VZ Navigator 3RD DEPTH 1. TXT Message 2. Picture Message 3.
Main Menu 2ND DEPTH 9. Settings & Tools 5. Sounds Settings 3RD DEPTH 7. Service Alerts 8. Device Connect 9. Power On/Off 6. Display Settings 1. Easy Set-up 2. Banner 3. Backlight 4. Wallpaper 5. Display Themes 6. Main Menu Settings 7. Font Type (TBD) 8. Dial Fonts 9. Menu Font Size 0. Clock Format 28 4RD DEPTH Main Menu 1. ERI 2. Minute Beep 3. Call Connect 4. Software Update 9. Settings & Tools 2ND DEPTH 7. Phone Settings 3RD DEPTH 1. Airplane Mode 2. Set Shortcuts 3.
2ND DEPTH Main Menu 9. Settings & Tools 0. Phone Info 3RD DEPTH 4RD DEPTH TO DISPLAY THE MISSED CALL ENTRY FROM THE NOTIFICATION SCREEN: *. Set-up Wizard MAKING A CALL 1. Enter an area code and a phone number. • To erase one digit at a time, press the CLR Key . • To erase the entire number, press and hold the CLR Key . • When you place or receive a call from phone numbers stored in your Contact List with a contact name, the name will be displayed. 2. Press the SEND Key . 3.
Wait (w) CALL WAITING FUNCTION The phone stops dialing until you press the SEND Key or OK Key to advance to the next number. If you are on a call and you receive another incoming call, you will hear a beep and the caller’s phone number will appear on the display. With Call Waiting, you may put the active call on hold while you answer the other incoming call. 1. Enter the phone number. 2. Press the Right Soft Key [Options]. 3. Select 2. Add Wait and press the OK Key. 4.
CALLER ID FUNCTION NEW MESSAGE Caller ID displays the number of the person calling when your phone rings. If the caller’s identity is stored in Contacts, the name appears on the screen. The caller ID is stored in the Recent Calls menu. To access the Messages Menu during a call: VIBRATE MODE Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate Vibrate Mode: 1. From idle mode, press and hold the Vibration Mode Key to activate vibration mode. 2.
VOICE PRIVACY DIALING LETTERS To turn the voice privacy feature On or Off: 1. Press the Right Soft Key OK Key. [Options], select Voice Privacy and press the MAKING AN EMERGENCY CALL The E911 feature automatically places the phone in Emergency Call Mode when you dial the preprogrammed emergency number, “911”. It also operates in Lock Mode and out of the service area. 911 IN LOCK MODE Allows you to dial the number associated with a specific word. For example, to call “1-800-FLOWERS”: 1.
3 STORING A PHONE NUMBER The Contact List stores up to 1000 entries. MEMORY FUNCTION This chapter addresses memory functions including: Storing a Phone Number Editing Contact Entries Default Numbers Entering Letters, Numbers & Symbols One, Two, Three - Touch Dialing ADDING A NEW CONTACT 1. From idle mode, enter the phone number you want to save. 2. Press the Left Soft Key [Save]. 3. Select 1. Add New Contact and press the OK Key. 4.
ADDING OR CHANGING GROUPS To organize your Contacts into groups: 1. From idle mode, press the Right Soft Key [Contacts], then highlight the desired Contact entry. 2. Press the Left Soft Key [Edit]. 3. Highlight Group and press the Left Soft Key [Set] 4. Select Family or Work, then press the OK Key [MARK]. To create a new group, press the Right Soft Key [New], enter the new group name, then press the OK Key [SAVE]. 5. Press the Left Soft Key [Done] to set the group. 6.
EDITING CONTACT ENTRIES ADDING A PHONE NUMBER FROM IDLE MODE 1. From idle mode, enter the phone number you want to save (up to 32 digits). 2. Press the Left Soft Key [Save]. 3. Highlight 2. Update Existing, then press the OK Key. 4. Highlight the existing Contact entry, then press the OK Key. 5. Highlight the following phone number type, then press the OK Key. Mobile 1 / Mobile 2 / Home / Work / Fax 6.
5. Press the Right Soft Key [Options], select 1. Remove Speed Dial and press the OK Key. 6. Select Yes and press the OK Key. A confirmation message appears. 7. Press the OK Key [SAVE] to update the contact entry. ENTERING LETTERS, NUMBERS & SYMBOLS Your device has a QWERTY Keypad that provides a superior typing experience on a small handheld device for easy and comfortable input. 02 DEFAULT NUMBERS 8 The phone number saved when a Contact is created is the Default Number.
4. [ ] Symbols Key: Press to open the symbols list. 5. [ ] Caps Key: Press to select a letter case for the standard text [Abc] input mode. [Abc], [ABC] and [abc] indicate the standard text input. 6. [ ] Enter Key: Press to insert a carriage return. 7. [ ] Delete Key: When in a Text entry field and in entry mode, press to delete the character to the left of the cursor. Press and hold to delete the entire word or character string that was just entered. 8.
4 NEW CONTACT To add a new number to your Contact List: Using this submenu, the number is saved as a new Contact. To save the number into an existing Contact, edit the Contact entry. MENU FUNCTION This chapter addresses accessing the menu and using its functions and features to customize your TXT8035PP.
New Contact: Add a new contact to your contact list. Erase: Deletes the contact from your contact list. New TXT Message: Allows you to send a TXT Message to the contact. New Picture Message: Allows you to send a Picture Message to the contact. New Voice Message: Allows you to send a Voice Message to the contact. Send IM: Allows you to send an IM message to the contact. Only available when an IM Screen Name is set for the contact. Send Email: Allows you to send an Email message to the contact.
TO SEND A TXT MESSAGE TO A GROUP 1. From idle mode, press the [MENU], then select 3. Contacts, 4. Groups. 2. Select the group you want to send a message to, then press the Right Soft Key [Options]. 3. Select 1. New TXT Message. 4. Input your message in the Text field and then press the Right Soft Key [Options] to select from the following: Insert Quick Text, Save As Draft, Add, Format Text, Priority Level or Cancel Message. 5. To send the TXT message, press the OK Key [SEND] or press the SEND Key .
These options will vary depending on the message contents chosen. 10. To send the Voice Message, press the OK Key [SEND] or press the SEND Key . Your phone has a special menu to organize your emergency contacts and personal information. SPEED DIALS TO ASSIGN EMERGENCY CONTACTS 01 From idle mode, calls can be placed to numbers stored in speed dials, and pressing & holding the location number on the keypad.
TO UNASSIGN EMERGENCY CONTACTS TO ERASE SAVED PERSONAL INFO 1. From idle mode, press the [MENU], then select 3. Contacts, 6. In Case of Emergency. 2. Select the contact you want to unassign, then press the Right Soft Key [Options]. 3. Select 2. Unassign. 4. A confirmation message appears. 1. From idle mode, press the [MENU], then select 3. Contacts, 6. In Case of Emergency. 2. Select Personal Info then press the OK Key [VIEW]. 3. Select the Note you want to erase then press the Right Soft Key [Erase]. 4.
• Remove All: Removes all contacts from Favorites. 4. Press the OK Key [VIEW]. A Name Card with the handset’s mobile number automatically appears. TO ERASE FAVORITE CONTACTS EDIT MY NAME CARD 1. From idle mode, press the Favorites/Mode Change Key , press the Directional Key left or right to scroll to FAVORITES, then press the OK Key. 2. Press the Directional Key left, right, up or down to select a desired contact, then press the OK Key [VIEW]. 3. Press the Left Soft Key [Erase]. 4.
2. When “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE” appears, press the OK Key to start searching Bluetooth devices. 3. Press the Directional Key up or down to select a desired device and press the OK Key [PAIR]. Please refer to page 82 for more details on Bluetooth. 4. The handset may prompt you for the passkey. Consult the Bluetooth accessory (sold separately) instructions for the appropriate passkey (typically “0000” - 4 zeroes). Enter the passkey, then press the OK Key. 5.
DIALED Displays information about the 90 most recently dialed numbers. Place a call to a dialed call by simply pressing the SEND Key . 1. From idle mode, press the [MENU], then select 7. Recent Calls, 3. Dialed. 2. Highlight an entry and do one of the following options: • Press the OK Key [OPEN] to view the entry. • Press the Send Key to place a call to the number. [Options] to select: • Press the Right Soft Key Save to Contacts: Stores the phone number to your Contacts.
After the 270 received, dialed or missed calls, the oldest call will automatically be erased from the history. Shortcut: To view a quick list of all your calls, press the Send Key from idle mode. VIEW TIMERS Checks the usage time and manages your calls within the limit you set. To view 11 timers (Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmit Data, Received Data, Total Data, Last Reset, Lifetime Calls, Lifetime Data Counter): 1.
2. If calling a contact from your Contact List, say Call . Your phone will ask you to confirm the name you said. Say “Yes“ if it was repeated correctly. That phone number will be dialed. If there is more than one number saved for that contact, you will be asked to confirm which number to dial. Example: Call John Work SEND Use the Send command to send a text or other type of message to a specified name or number. 1.
MY VERIZON SENSITIVITY Use the My Verizon command to access information about your Verizon account. The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones. If you frequently experience the messages “Please try again” or “COMMAND NOT RECOGNIZED Try again?”, adjust the sensitivity toward Less Sensitive. If you frequently experience false activations (when the phone recognizes a name you didn’t say), adjust the sensitivity toward More Sensitive. 1.
5. When you are finished with a full session, you will reach a screen that reads “Adaptation Complete”. PROMPTS Allows you to select voice command system characteristics. 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 1. Voice Commands. 2. Press the Right Soft Key [Settings] and then select 4. Prompts. 3. Select 1. Mode, 2. Audio Playback or 3. Timeout, then press the OK Key.
3. Select the percentage of tip in the TIP(%) field by Pressing the Directional Key left or right. The amount of a tip will be displayed in the Tip ($) field. Press the Directional Key down. 4. Input the number of persons by pressing the Directional Key left or right. The tip amount and cost per person is shown. 5. Press the CLR Key [Reset] to clear the fields. Press the END Key [Close] to return to the Previous menu. CALENDAR The Calendar tool provides easy and convenient access to your schedule.
VIEW SAVED EVENT TITLE 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 4. Calendar. 2. Choose the event then press the OK Key [VIEW]. Enter the title of the diary. ERASE SAVED EVENT 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 4. Calendar. 2. Choose the event then press the OK Key [VIEW]. 3. Press the Left Soft Key [Erase], select Yes, then press the OK Key. ERASE ALL PAST EVENTS Allows you to delete past events from today. 1.
EDIT AN E-DIARY TIME 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 5. E-Diary. 2. Highlight an E-diary, then Press the Right Soft Key [Options]. 3. Select 2. Edit and press the OK Key, then modify the E-diary. 4. Press the OK Key [SAVE] to save your modifications. Use the keypad to set a time for the alarm and press the Left Soft Key set am or pm. ERASE E-DIARY 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 5. E-Diary. 2.
RESET ALL ALARM SETTINGS WORLD CLOCK 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 3. Tools, 6. Alarm Clock. 2. Highlight an Alarm (1, 2 or 3), then press the Right Soft Key [Options]. 3. Select 3. Reset All, then press the OK Key. 4. “RESET ALL ALARMS?” will appear on the screen. Select Yes and press the OK Key. To display the time and date in pre-programmed cities: STOP WATCH Simultaneously times up to eight different events. To operate the stop watch: 1.
8. Under End Time, use the keypad to set an end time and press the Left Soft Key to select am or pm. 9. To save a DST setting, press the OK Key [SAVE] NOTEPAD + Your phone includes an internal notepad that can be used to compose and store reminders and notes. To create a note: 1. From idle mode, press the 3. Tools, 9. Notepad +. [MENU], then select 9. Settings & Tools, Shortcut: Phone up and press the Notepad + Key . 2. Press the Left Soft Key [New] to enter a new note. 3.
MY VERIZON ADD NEW DEVICE To access your Verizon account information: Pairing is the process that allows the handset to locate, establish and register a 1-to-1 connection with the target device. 1. From idle mode, press the [MENU], then select 5. My Verizon. Press the OK Key to unlock the Keypad, then Press the Directional Key left. BLUETOOTH Bluetooth® technology connectivity enables wireless connections between electronic devices.
OPTIONS 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 4. Bluetooth. 2. Select the paired device. 3. Press the Right Soft Key [Options]. 4. Select one of the following options, then press the OK Key. • Remove Device: Removes a device from the pairing list. • Rename Device: Renames a paired device. • Incoming Security: Sets permissions for connecting an incoming device. • Service Discovery: Searches for the services that the selected device supports.
AUTO PAIR HANDSFREE CALL SOUNDS To set Auto Pair Handsfree On/Off: To set ringtones for types of incoming calls: 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 4. Bluetooth. 2. Press the Right Soft Key [Options]. 3. Select 4. Auto Pair Handsfree. 4. Select On or Off, then press the OK Key [SET]. SOUNDS SETTINGS CALL VIBRATE EASY SET - UP 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 5. Sounds Settings, 2. Call Sounds, 2. Call Vibrate. 2.
• Reminder: Press the Directional Key up or down to select Once, Every 2 Minutes, Every 15 Minutes or Off, then press the OK Key [SET]. EMERGENCY TONE 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 5. Sounds Settings, 3. Alert Sounds, 4. Emergency Tone. 2. Select Alert, Vibrate or Off, then press the OK Key [SET]. 3. To view the help for Emergency Tone, press the Right Soft Key [Help]. MISSED CALL 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 5.
POWER ON/OFF To set the phone to sound a tone when the phone is powered on or off: 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 5. Sounds Settings, 9. Power On/Off. 2. Press 1. Power On or 2. Power Off. 3. Select On or Off, then press the OK Key [SET]. DISPLAY SETTINGS Allows you to customize the display. EASY SET-UP Easy Set-up menu allows you to set nine stages for Display Settings with simple operation. 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 6.
BACKLIGHT MAIN MENU SETTINGS To set the duration for backlight illumination of the Main Screen and Keypad: To change Main Menu layout and type: 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 6. Display Settings, 3. Backlight. 2. Press 1. Display or 2. Keypad. 3. Select 7 Seconds, 15 Seconds, 30 Seconds or Always On, then press the OK Key [SET]. 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 6. Display Settings, 6. Main Menu Settings.
2. Select VZW Font, Sleek Modern Font or Dandy Round Font, then press the OK Key [SET]. To preview the selected font type, press the Left Soft Key [Preview]. PHONE SETTINGS AIRPLANE MODE In Airplane Mode, all menu functions can be accessed except making calls, receiving calls, data connection and Bluetooth®. Activating Airplane Mode will disable all wireless communications. Services that support Location On functions are temporarily disabled. 01 1. From idle mode, press the [MENU], then select 9.
3. Press 1. Reset Shortcut (1, 2, 3 or 4) or 2. Reset My Shortcuts. 4. Select Yes and press the OK Key. SET DIRECTIONAL KEYS From idle mode, you can specify the function that is accessed when you press the Directional Key up, down, left or right. 1. From idle mode, press the [MENU], then select 9. Settings & Tools, 7. Phone Settings, 2. Set Shortcuts, 2. Set Directional Keys. 2. Select UP Directional Key, LEFT Directional Key or DOWN Directional Key, then press the OK Key [SET]. 3.
