User's Manual

ANSWERING CALLS
1. Press the SEND Key to answer the incoming call.
Depending on your phone’s settings, you may also answer incoming calls
by opening the phone or by pressing any key.
2. To ignore incoming calls, press the Right Soft Key [Ignore].
With Auto w/ Hands-free, a call is automatically answered after a preset
number of ring tones. For more details, see page 63.
ENDING A CALL
1. Press the END Key.
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call icon appears on the
display.
DISPLAY THE MISSED CALL FROM THE NOTIFICATION
1. Select View Now and press the OK Key.
2. To dial the phone number, press the SEND Key.
DISPLAY A MISSED CALL FROM IDLE MODE
1. Press the OK Key [MENU], scroll to Recent Calls and press the OK
Key.
2. Select Missed and press the OK Key.
3. Select the missed call and press the OK Key [OPEN].
4. To dial the phone number, press the SEND Key.
WAIT/PAUSE
Pauses are used for automated systems (i.e., voice mail or calling cards). The
numbers entered after the pause will automatically be dialed after the pause.
It is useful for dialing into systems that require a code.
Wait (W)
The phone stops dialing until you press the Send Key to dial the next number.
1. Enter the phone number.
2. Press the Right Soft Key [Options].
3. Scroll to select Add Wait and press the OK Key.
4. Enter additional next number(s).
5. Press the SEND Key to dial.
20 Chapter 2 − Basic Operation
Basic Operation
2-Sec Pause (P)
The phone waits 2 seconds before sending the next digits automatically.
1. Enter the phone number.
2. Press the Right Soft Key [Options].
3. Select Add 2-Sec Pause and press the OK Key.
4. Enter additional number(s) (pin number or credit card number).
5. Press the SEND Key to dial.
MAKING AN INTERNATIONAL CALL
MAKING AN GSM INTERNATIONAL CALL THE U.S. FROM
ANOTHER COUNTRY
The United States is the default on your phone. When both Assisted Dialing is set to
ON, and the reference country is United States of America; you can place a call to the
U.S. from another country by using an existing number from you contact list (as if
you were in the U.S.). In this scenario, there is no need to add your current country’s
exit code when you are dialing contacts with these settings.
1. Press and hold the International Dial Key to display the “+” symbol.
The “+” symbol automatically inserts the exit code for the country
from which you are calling.
2. Press
to insert the U.S. country code, then enter the area code
and number.
3. Press the SEND Key.
MAKING AN GSM INTERNATIONAL CALL FROM ANOTHER
COUNTRY GSM ONLY
1. Press and hold the International Dial Key to display the “+” symbol.
The “+” symbol automatically inserts the exit code for the country
from which you are calling.
2. Enter the country code of the person you are calling. Enter the area
code, without the leading zero, followed by the number of the person
you are calling.
3. Press the SEND Key.
There are some exceptions for leaving out the leading zero such as Italy,
Finland and Spain.
The SIM card must be installed in order to make calls in GSM mode.
Basic Operation − Chapter 2 21
Basic Operation