User's Manual
3 WAY CALLING
You can talk to two participants at the same time. During the call, the normal
airtime rates will be applied for each of the two calls.
1. Enter the phone number and press the SEND Key.
2. When you have connected, enter the second phone number to call
and press the SEND Key.
3. When you’re connected to the second party, press the SEND Key again
to begin your 3-Way call.
If one of the participants hangs up during the call, you and the remaining
participant stay connected. If you initiated the call and are the first one to
hang up, all three calls are disconnected.
CALL WAITING
If you are on a call and you receive another incoming call, you will hear two
beeps and the caller’s phone number will appear on the display. With Call
Waiting, you may put the active call on hold while you answer the other
incoming call.
1. Press the SEND Key to answer the other call. The first call will
automatically be placed on hold. To switch back, press the SEND
Key again.
CALLING A NUMBER FROM CONTACTS
1. Press the Right Soft Key [Contacts].
2. Scroll to the contact and press the OK Key [VIEW].
3. Scroll to the phone number.
4. Press the SEND Key to place the call.
Dialing from the contact will dial the default number automatically. If the
contact has multiple numbers saved, scroll to the number to dial and press
the Send Key.
ADJUSTING THE VOLUME
ADJUSTING THE MASTER VOLUME
1. Press the Volume Keys / up or down to select All Sounds
Off, Alarm Only, Vibrate Only, Low, Medium Low, Medium,
Medium High and High.
2. Press the OK Key [SET] to save.
3. To check the ringtone’s volume, press the Left Soft Key [Play].
22
Chapter 2 − Basic Operation
Basic Operation
ADJUSTING THE VOLUME DURING A CALL
1. To increase the volume, press the Volume Keys up.
2. To decrease the volume, press the Volume Keys
down.
CALLER ID
Caller ID displays the name and the phone number of the person calling.
If the caller’s information is not stored in your Contacts List, only the
phone number is displayed.
TURNING VIBRATE MODE ON OR OFF
Vibrate Mode mutes the tones and activates an alert for an incoming call or
message.
1. To activate, press and hold the Vibrate Mode Key .
2. To deactivate, press and hold the Vibrate Mode Key
again.
SPEAKERPHONE
The Speakerphone feature lets you hear audio through the speaker and talk
without holding the phone. With the flip open, press to turn speakerphone on
or off. With the flip closed, press and hold to lock or unlock the key.
1. To activate, with the flip open, press the Speakerphone Key .
If you activate Speakerphone when you are not on a call, it will deactivate
automatically after one minute.
AVAILABLE OPTIONS DURING A CALL
During a phone call, you can access the following features by pressing the
Right Soft Key [Options]. Press the OK Key to select any of the following
options:
•
New Message
•
Contact List
•
Recent Calls
•
Bluetooth Menu
•
Main Menu
•
Notepad
•
Voice Privacy
MAKING AN EMERGENCY CALL
The 911 feature automatically places the phone in Emergency Call Mode when
you dial the preprogrammed emergency number, 911. It also operates in Lock
Mode and out of the service area.
Basic Operation − Chapter 2
23
Basic Operation