User's Manual

CONTACTS <NAME>
Use the Contacts command to retrieve and display information for any name stored
in your contact list.
1. You will hear Please say a command and the Voice Commands
menu will be displayed.
2. Say Contacts <Name>.
Examples: - Contacts Tom Jones.
3. The View Contact page will be displayed for that contact name.
REDIAL
Use the Redial command to redial with the directory number which talks over the
phone recentry.
1. You will hear Please say a command and the Voice Commands
menu will be displayed.
2. Say Redial.
MY VERIZON
1. You will hear Please say a command and the Voice Commands
menu will be displayed.
2. Say My Verizon.
3. Your phone will make a web connection.
HELP
1. You will hear Please say a command and the Voice Commands
menu will be displayed.
2. Say Help.
3. The Help guide will be displayed on your phone.
4. Press the OK Key to return to the previous screen.
VOICE COMMANDS SETTINGS
CONFIRMATION
When voice recognition is not confident it has recognized a name or number correctly, it
will show you a list of up to three choices. You can control when choice lists appear.
1. Press the OK Key [MENU], scroll to Settings & Tools and press
the OK Key, scroll to Tools and press the OK Key, scroll to Voice
Commands and press the OK Key.
2. Press the Right Soft Key [Settings], scroll to Confirmation and
press the OK Key.
70 Chapter 4 − Menu Function
Voice Tools
3. Scroll to select Automatic, Always Confirm or Never Confirm and
press the OK Key.
SENSITIVITY
The Sensitivity setting controls how the voice recognition software determines when a
spoken word is a match. If you frequently experience the messages Please Repeat or No
Match Found, adjust the sensitivity toward Reject Less. If you frequently experience false
activations (when the phone recognizes a name you didn’t say), adjust the sensitivity
toward Most Sensitive.
1. Press the OK Key [MENU], scroll to Settings & Tools and press
the OK Key, scroll to Tools and press the OK Key, scroll to Voice
Commands and press the OK Key.
2. Press the Right Soft Key [Settings], scroll to Sensitivity and press
the OK Key.
3. Scroll to select Most Sensitive, Recommended or Least
Sensitive and press the OK Key.
ADAPTATION
Voice Command is speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Command, so the
Adapt Voice feature allows users to dramatically improve the recognition accuracy through
adaptation. Users who get acceptable recognition accuracy will find no additional benefit
to performing the Adapt Voice adaptation.
1. Press the OK Key [MENU], scroll to Settings & Tools and press
the OK Key, scroll to Tools and press the OK Key, scroll to Voice
Commands and press the OK Key.
2. Press the Right Soft Key [Settings], scroll to Adaptation and press
the OK Key.
3. Scroll to select Adapt Voice or Reset Voice and press the OK Key.
To activate press the OK Key.
• Adapt Voice: Requires that you make recordings of your voice to customize
the voice recognitions system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the
adaptation to the factory default settings.
Reset Voice menu option only appears after you finish the Adapt Voice
process.
4. Wait for the beep and then repeat the sentences using a normal
tone of voice.
5. Repeat steps 1 - 4 when you are finished with a full session, you will
reach a screen that reads Adaptation Complete.
Menu Function − Chapter 4 71
Voice Tools