Pantel HI SPEED DIGITAL WIRELESS OUTDOOR HDTV Wireless LCD TV User Manual ATSC/NTSC Series Operation Manual 1/30
Operation Manual Table of Contents Important Safety Instructions ........................................................................... 3 Supplied Accessories ........................................................................................ 3 HDTV Unit ......................................................................................................... 4 Main Features ................................................................................................... 4 Remote Control Unit ..
Important Safety Instructions Electricity is used to perform many helpful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock or fire. To ensure your safety and prevent potential danger, please read the following precautions before using this product. z Read these instructions. z Heed all warnings.
HDTV Unit Input and output interfaces: Main Features 1. 2. LCD Panel – 1366 x 768 resolution / 1920 x 1080 resolution Input signal: RF signal * 1: NTSC, ATSC-8VSB, ATSC-QAM64/QAM256 Color component (Y Pb/Cb Pr/Cr) * 1 + Audio L/R * 1 S-Video * 1 + Audio L/R * 1 CVBS * 1 + Audio L/R * 1(Video) VGA * 1 + Audio L/R * 1 (VGA input can be switched into component input mode) with Analog EDID HDMI * 1 + Audio L/R * 1 with Digital EDID. HDMI can be used in either PC or Video.
USB interface: support firmware upgrading. RS-232 COM port: control mode. AC Power input 3. Output signal: Line Out * 1 Earphone * 1 Internal speaker: 10W * 2 4. SD, HD support. RF signal can support: 480i, 480p, 720p, 1080i YPbPr interfaces can support 480i, 480p, 720p, 1080i. All ATSC Modes. HDMI interface can support 480i, 480p, 720p, 1080i, and DVI input resolution timing. VGA Interface can support VESA Standard. 5. VGA DPMS function supported. 6. Preferred digital audio channel selection. 7.
Volume AUDIO MUTE INPUT D IS P LA CVBS DIGITAL OUTDOOR-T.V. Sleep VGA YPbPr Pantel TIME S-VIDEO OUTDOOR-T.V. Sleep TIME ASPECT U Pantel DIGITAL VGA Tunner . S-VIDEO A TO .K HDMI O LI G H T ASPECT Tunner . CVBS MENU RTN C.C Channel 9 8 0 7 FAV 3 6 2 5 4 ATSC-NTSC WR450-A 1 .K YPbPr TO Y U T P O HDMI H IS Y LI G AUDIO Volume 9 MUTE 6 Channel INPUT 3 D LA A RTN MENU C.
On Screen Display (OSD) Operations Video Option Select Source Picture Settings Aspect Ratio Color Temperature Back Light Screen Adjustment Description Select the video input source. Adjust the picture setting. Select the display aspect ratio. Select the color temperature. Adjust the backlight value. Adjust the picture position. Video >Select Source Option Description Tuner Select the tuner as the input source.
Video >Picture Settings Option Description Preset There are standard, vivid, movie, Pro and custom modes provided for usage. Brightness Adjust to brighten or darken the picture. Contrast Adjust to increase or decrease the contrast. Saturation Adjust to increase or decrease the saturation. Hue Adjust to increase or decrease the hue of the picture. Sharpness Adjust to sharpen or soften the picture. Noise Reduction Select to reduce the noise level of the picture.
Video > Color Temperature Option Description Cool Select to give the white colors a bluish tint. Native Select to give the white colors a native tint. Warm Select to give the white colors a reddish tint. Video > Back Light Option Bright Room Dark Room Medium Room Description Select the bright backlight setting. Select the dark backlight setting. Select the native backlight setting.
Video > Screen Adjustment Option Description Horizontal Adjust the position of the picture left and right. Vertical Adjust the position of the picture up and down. Phase Adjust the distortion effects of horizontal wavy lines or ripples. Auto Sync Adjust the display position and phase of the picture automatically. Audio Option Bass, Treble & Balance MTS Digital Audio Language TV Speaker Mute Description Adjust the bass, treble level and the balance between the speakers.
Audio > MTS Option Mono Stereo SAP Description Select for mono reception. Select for stereo reception. Select to automatically switch the TV to second audio program. Audio > Digital Audio Language Option Description English Set the digital audio language as English. French Set the digital audio language as French. Spanish Set the digital audio language as Spanish.
Settings Option Close Caption Timers Date & Time Menu Language VGA DPMS Parental Control Reset to Default Description Set the close caption options Set the timers to turn on or turn off TV. Set the current date and time. Select the language for the On-Screen-Display menu. Turn on/off the VGA display power management signaling. Set the parental control options. Reset to default settings Settings > Closed Caption > Digital Caption Option Option Description Text Style Select the caption text style.
Settings > Closed Caption > Caption Preference Option Description Always Caption Always to turn on analog caption service. Service Always Digital Always to turn on digital caption service. Caption Service Automatic Automatically turn on the analog or digital caption service depends on the source signal. Settings > Timers > Timer 1/2 Setting Option Description Sun, Mon, Tue, Select the days in the week.
Settings > Date & Time Option Description Today’s Date Set the date. Current Time Set the current time. Time Zone Set the time zone. Adjust for Daylight Select to adjust daylight saving time. Saving Time Auto-Update Time Automatically update the time information according to the source signal. Settings > Parental Control Option Description Rating Turn on or turn off the custom rating. USA-TV Rating Select the block programs by the USA-TV rating.
Settings > Parental Control > USA-TV Rating Option Description Lock All Lock the all rating setting. Unlock All Unlock the all rating setting. Settings > Parental Control > Channel Locks Option Description Lock All Lock all channels. Unlock All Unlock all channels.
Channels > Scan Channel Option Description Antenna Select to scan all available channels from antenna. Cable Select to scan all available channels from cable. Information Option Channel Information Firmware Version Description Select to display the channel information. Select to display the firmware version. RF signal input Accepted formats: NTSC, ATSC-VSB, QAM64 and QAM256 3D-COMB filter applied when detected in NTSC mode.
CVBS + Audio L/R input RCA jack accepts composite video input format. RCA*2 jacks (color-coded: white and red) to accept Audio L/R input. 3D-COMB filter applied. Brightness, Contrast, Color, Tint, Sharpness and Color Temperature control, VGA input + Audio L/R input 15-pin D-SUB jack accepts VGA signal input or color component (480i, 480p, 720p, 1080i input format, also 1080p for 52” and 65” models) input. OSD can switch to VGA input mode or color component input mode.
VGA / DVI Supported Modes VESA STANDARD MODE ONLY Resolution 640 x 350 640 x 400 fV(Hz) 85 85 640 x 480 720 x 400 800 x 600 1024 x 768 66,72,75,85 70,85 56,60,72,75,80 60,70,75 1280 x 768 1360 x 768 1920 x 1080 60 60 60 ***52” and 65” ONLY*** 18/30
Digital Wireless Transmitter Kit STV-1100TX Operation Manual Table of Contents Accessories Check-list…………………………………….………….…….20 .SAFETY INSTRUCTIONS…..…………………….……………….…….20 .CONTENTS……………………………………….………………….…....23 Chapter 1 Getting Started…………………………………………..…24 1.1. STV1100 Transmitter unit……..……………………24 1.2.1 Front Panel View……..…………………….………24 1.2.2 Rear Panel View……………………………….,….24 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Setup Menus……………………………………………….
Accessories Check-list: STV-1100TX KIT(VW5) AC Adaptor AC power cord AV cable S-Video cable IR cable .a. SAFETY INSTRUCTIONS z READ INSTRUCTIONS: All the safety operating instructions should be read before the product is operated. z RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. z POWER SOURCES The product should be operated only from the type of power source indicated on the marking label.
z ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
z WATER AND MOISTURE Do not use this product near water. For example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like. z ATTACHMENT Do not use attachments not recommended by the product manufacturer as they may cause hazards. z CLEANING Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth for cleaning.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged. Liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. .CONTENTS Chapter 1 Product Overview The Wireless Video Wave Module (STV-1100) product delivers video and audio using wireless WLAN 802.
Chapter 1 Getting Started 1.1 Wireless Transmitter unit 1.2.1 TX Front Panel View Power LED TX LED RX LED Link LED POWER LED Power ON/OFF status: Green light: Unit is ON No light: Un it is OFF LINK LED Indicates link status: Slow blinking : searching for RX unit Fast blinking: found RX and connecting ON: connection and authentication completed TX LED Indicates transmit speed: Fast blinking: high rate Middle blinking: middle rate Slow blinking: low rate 1.2.
Power Switch DC IN S-VIDEO IN S-VIDEO OUT Audio OUT Video OUT Audio In Video In IR Connector Pairing SW Press the power button to turn the power ON/OFF Connect the DC-in from the supplied AC adaptor here Connect the S-Video cable here if the input source - DVD, VTR etc has an S-Video out.
Use your DVD (or other video source) remote control by pointing at the IR receiver window located the front panel of VW-5RX unit. Chapter 3 Main Specifications VW-5 System 1, IEEE802.11a (5.2G) 4, MPEG2 Encoder and Decoder built in 5, Adaptive transmission (24Mbps, 12Mbps, 6Mbps) 6, Adaptive Video rate (14Mbps, 8Mbps, 4Mbps) 7, Automatic Error recovery 8, Small constant latency (less than 0.4-0.6s) 9, AES content protection Wireless LAN Interface Standard Transmission method Frequency area IEEE802.
Infrared Ray Remote Controller Signal carrier frequency In/Out Connector Video Input Video Output（Through output） Audio Input Audio Output（Through Output） IR Cable Others Size Weight 38KHz RCA pin (Composite), S connector RCA pin (Composite), S connector RCA pin L/R RCA pin L/R Mini Jack Width 220mm , Depth 150mm, Height 45mm 390g (only main body) Power supply（AC adaptor）AC in ：100-240V 50/60Hz 1.0A Power consumption Operation environment Approved Standard DC out： 12V(±5%) 2.5A Max approx. 6.
colour component present). AUDIO INPUT 1. STV-1100TX supports an analog stereo audio input, consisting of left and Right audio channels. VIDEO OUTPUT 1. STV-1100RX supports the following video outputs: Composite video output S-Video output 2. The two outputs are active simultaneously. 3. Video standard output NTSC is the same standard as the video input used. 4. Video standard supported on video outputs: NTSC/480I 5.
Optional Accessories: CL-1360 Ceiling Mount WR-6015 Wall Mount AS-320 Table-top Stand 29/30
ST-120 Floor Mount Stand Pantel Corp. 11562 Knott St. Ste. 8 Garden Grove, CA 92845 U.S.A.
