User Manual
Table Of Contents
- Equipment Information
- CE Declaration
- FCC Notice
- Industry Canada Compliance Statement
- Roving Networks RN42
- FCC Regulatory Information
- Limited Warranty
- Proprietary Notice
- Table of Contents
- Introduction
- Getting Started
- Function Screens
- Using the CAPSURE Instrument
- Selecting Samples
- Calibration
- Operation
- Appendices
CAPSURE User Manual
26
Match Quality Indication
After a match, the instrument displays 1, 2, or 3 colored bars in the title row of the display.
The bars indicate the quality of the match that was obtained. One “red” bar indicates an ok
match, two “yellow” bars indicate a better match, and three “green” bars indicate the best
match. No color bars would indicate no close match was found.
= Best match
= Better match
= Ok match
= No close match
The bars are for informational purpose only. Three “green” bars is the best possible match,
where as one “red” or two “yellow” bars indication basically informs you that instrument
made a suitable match. The fewer color bars on a measurement, the more likely color
differences will be noticed.
Additional details about the identified color can be displayed by pressing down side of the
Navigation control.
Note: The additional match details that display depend on the fan deck used.
Important: All sRGB and Adobe 98 values are displayed as per specification calculation
under D65/2.
Match quality bars location
Nav. down
Nav. down