User Manual

ManualsBrandsPantum ManualsLaser PrintersCopier Laser Printer All in One Wireless Printer Scanner Mobile Printing in Black and White, Auto Duplex Printing, 32ppm

121

122

123

124

125

126

127

128

129

130

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1.Product series introduction
- 1.2.Supplied Accessories
- 1.3.Product View
- 1.4.Laser Toner Cartridge
- 1.5.Control Panel
  - 1.5.1.Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1.Paper Specification
- 2.2.Special Paper
- 2.3.Non-printing Area and Non-scanning Area
- 2.4.Loading Paper
  - 2.4.1.Loading into the Automatic Feeder Tray
  - 2.4.2.Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1.Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. Mac system driver installation
  - 3.2.1.Driver installation
- 3.3.Add printer to Mac system
4. Wired network setup (applicable to wirednetwork models)
- 4.1.Set IP Address
  - 4.1.1.Automatic Setting
  - 4.1.2.Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1.Basic structure mode
- 5.2.Wi-Fi Direct mode
- 5.3.Wireless network setup FAQs
6. Web server
- 6.1.Visit the embedded Web server
- 6.2.Use Web server to manage printer
7. Print
- 7.1.Print Function
- 7.2.Print Settings
- 7.3.Cancel printing
- 7.4.Printing Mode
  - 7.4.1.Printing with the Automatic Feeder Tray
  - 7.4.2.Printing with manual feed tray
- 7.5.Automatic Two-Sided Printing
  - 7.5.1.Duplex printing unit setup
  - 7.5.2.How to carry out auto duplex printing
- 7.6.Fine mode printing
- 7.7.Mute printing
- 7.8.Auto shut-off setting
- 7.9.Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1.Intensity
  - 8.6.2.Paper setting
9. Scan
- 9.1.Pull Scan
- 9.2.Mac System Scan
  - 9.2.1.ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4.PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1."Pantum" APP
- 11.2.Mopria mobile print
- 11.3.NFC function
  - 11.3.1.Preliminary preparations
  - 11.3.2.How to use NFC function to print
- 11.4.AirPrint mobile print
12. General Settings
- 12.1.System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1.Cleaning the Printer
- 13.2.Toner cartridge and drum component maintenance
  - 13.2.1.About toner cartridge and drum component component
  - 13.2.2.Replace toner cartridge and drum component
14. Troubleshooting
- 14.1.Cleaning Jammed Paper
- 14.2.Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1.Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1.Overview of the Specifications
- 16.2.Print Specifications
- 16.3.Copy Specifications
- 16.4.Scan Specifications
- 16.5.Fax specification (applicable to machine with a fax)

7.Set printing parameters, e.g. print pages.

8.Tap “print”.

Note: • If printing fails, please inspect if the Android device is connected to the wireless

network where the printer is connected to.

•

If the Android device cannot detect any printer, please inspect if power of the printer

is turned on and if the printer is turned on.

11.3.NFC function

NFC function allows non-contact point-to-point data transmission between electronic devices.

To use this function, you need to install the Pantum printer App on a mobile phone that

supports NFC, or conduct Mopria mobile printing after finishing Wi-Fi Direct connection

through NFC function.

Note: • NFC recognition may not be used normally affected by the material of phone

• Touch time and distance may differ because of the mobile phones used.

11.3.1.Preliminary preparations

1. Printer with Wi-Fi Direct function.

2. Android 5.0 or higher version mobile devices support NFC function and Wi-Fi Direct

function.

11.3.2.How to use NFC function to print

Inspect if the NFC and Wi-Fi Direct function are enabled on the mobile device and if

Wi-Fi Direct function of printer is enabled. (Please refer to Chapter 12.2 for how to enable

Wi-Fi Direct function).

2. Knock gently the NFC mark that indicates the NFC antenna (on the back of the mobile

device generally) on the printer and then wait for several seconds; then, the printer application

will start and the mobile device will connect to the printer.

Note: • For some mobile devices, NFC antenna may not be on their backsides. Before

touching, please check the position of the NFC antenna of your mobile device.

• If the mobile device is not installed with Pantum App, the Pantum App download link

will pop out automatically. Try again after downloading and installing the App.

3. Select the content to be printed and set printing parameters according to needs.

4. Click print and the printer will start to print.

cover.

110